教授課程

流體力學、紊流理論與應用、燃燒學、通風科技與應用、內燃機、高等熱流實驗、數值分析、流體力學實驗、熱工實驗

期刊論文

1. Toh, H. T., Huang, R. F., Lin, K. H., Chern, M.-J., “Computational study on the effect of inlet port configuration on in-cylinder flow of a motored four-valve internal combustion engine,” accepted for publication by Journal of Energy Engineering - ASCE on Jan. 6, 2011.
2. Huang, R. F., Nian, Y.-C., Chen, J.-K., and Pen, K. L., “Improving flow and spillage characteristics of range hood by using inclined air-curtain technique,” accepted for publication by Ann. Occupational Hygiene on Aug. 22, 2010. On line version published on Nov. 11 - doi: 10.1093/annhyg/meq070, pp. 1-16.
3. Liu, S. H., Huang, R. F., and Chen, L. J., “Performance and inter-blade flow of axial flow fans with different blade angles of attack,” accepted for publication by JCIE on October 23, 2009.
4. Huang, R. F. and Lin, B. H., “Effects of flow patterns on aerodynamic forces of a square cylinder at incidence,” accepted for publication by Journal of Mechanics on September 23, 2010.
5. Huang, R. F., C.-Y. Ho, C. Y., and Chen, J.-K. “Pulsatile flow patterns and wall shear stresses in arch of a turn-around tube with/without stenosis,” Journal of Mechanics, Vol. 27, No. 1, 2011, pp. 9-24.
6. Huang, R. F., Yang, T.-F., and Lan, Y.-K, “Pulsatile flows and wall shear stresses in models simulating normal and stenosed aortic arches,” Experiments in Fluids, Vol. 48, No. 3, 2010, pp. 497-508.
7. Huang, R. F., Lin, B. H., and Yen, S. C., “Time-averaged topological flow patterns and their influences on vortex shedding of a square cylinder in crossflow at incidence,” Journal of Fluids and Structures, Vol. 26, No. 3, 2010, pp. 406-429.
8. Liu, S. H., Huang, R. F., Lin, C. A., “Computational and experimental investigations of axial flow fan using downstream flow resistance method,” Experimental Thermal and Fluid Science, Vol. 34, No. 7, 2010, pp. 827-837.
9. Tsai, S. J., Huang, R. F., and Ellenbecker, M. J., “Airborne nanoparticle exposures while using constant-flow, constant-velocity, and air-curtain isolated fume hoods,” Ann. Occupational Hygiene, Vol. 54, No. 1, 2010, pp. 78-87.
10. Laretero, M. E. and Huang, R. F., “Behaviors of flame and flow of swirling wake during fuel jet oscillation due to acoustic excitations,” Journal of Mechanics, Vol. 26, No. 3, 2010, pp. 279-286.
11. Loretero, M. and Huang, R. F., “Effects of acoustic excitation on flame and flow behaviors of axisymmetric swirling wakes,” Journal of Engineering for Gas Turbines and Power (ASME Transcations), Vol. 132, No. 12, 2010, pp. 121501-1 - 121501-9. doi: 10.1115/1.4001768.
12. Huang, R. F., Nian, Y.-C., and Chen, J.-K., “Differences of flow and spillage characteristics between conventional and inclined air-curtain range hoods under static condition,” Environmental Engineering Science, Vol. 27, No. 6, 2010, pp. 513-522.
13. Huang, R. F., Dai, G.-Z., and Chen, J.-K., “Effects of mannequin and walk-by motion on flow and spillage characteristics of wall-mounted and jet-isolated range hoods,” Ann. Occupational Hygiene, Vol. 54, No. 6, 2010, pp. 625-639.
14. Tseng, L. C., Huang, R. F., and Chen, C.-C., “Significance of face velocity fluctuation in relation to laboratory fume hood performance,” Industrial Health, Vol. 48, No. 1, 2010, pp. 43-51.
15. Chen, J.-K., Huang, R. F., and Dai, G.-Z., “Flow characteristics and spillage mechanisms of wall-mounted and jet-isolated range hoods,” Journal of Environmental Hygiene, Vol. 7, No. 11, 2010, pp. 651-661.
, Lin, K. H., Yeh, C.-N., and Lan, J., “In-cylinder tumble flows and performance of a motorcycle engine with circular and elliptic intake ports,” Experiments in Fluids,  Vol. 46, No. 1, 2009, pp. 165-179.
17. Huang, R. F. and Chou, C. I., “Flow and performance of biological safety cabinet,” Ann. Occupational Hygiene, Vol. 53, No. 4, 2009, pp. 425-440.
18. Huang, R. F., Chou, C. I., and Hung, C. H., “Improving aerodynamics and operator protection performance of biological safety cabinet subject to dynamic influences,” Environmental Engineering Science, Vol. 26, No. 7, 2009, pp. 1217-1226.
19. Toh, H. T., Huang, R. F., and Chern, M. J., “A preliminary numerical study of a swirling jet behind a circular disc,” Journal of Mechanical Engineering Science (Proceedings of the Institution of Mechanical Engineers, Part C), Vol. 223, No. C5, 2009, pp. 1127-1139.
20. Tseng, L. C., Huang, R. F., and Chen, C. C., “Effects of doorsill jet-injection on fume cupboard containment,” Ann. Occupational Hygiene, Vol. 52, No. 7, 2008, pp. 635-644.
21. Huang, R. F. and Yen, S. C., “Aerodynamic characteristics and thermal structure of non-premixed reacting swirling-wake,” Combustion and Flame, Vol. 155, No. 4, 2008, pp. 539-556.
22. Huang, R. F., Yu, C. H., and Yeh, C.-N., “Manipulating tumble and swirl flows in cylinder of a motored four-valve engine by inlet deflection valve,” Journal of Mechanics, Vol. 24, No. 4, 2008, pp. 333-345.
23. Huang, R. F., Yang, H. S., and Yeh, C.-N., ”In-cylinder flows of a motored four-stroke engine with flat-crown and slightly concave-crown pistons,” Experimental Thermal and Fluid Science, Vol. 32, No. 5, 2008, pp. 1156-1167.
24. Huang, R. F. and Wu, J. S., “Effects of cylinder wake on separated boundary layer and vortex shedding of a wing,” AIAA Journal (American Institute of Aeronautics and Astronautics), Vol. 45, No. 1, 2007, pp. 247-256.
25. Huang, R. F., Chang, S. W., and Chen, K.-H. “Flow and heat transfer characteristics in rectangular channels with staggered transverse ribs on two opposite walls,” J. of Heat Transfer (ASME Transactions), Vol. 29, No. 12, 2007, pp. 1732-1736.
26. Chang, S. W., Yang, T. L., Huang, R. F., and Sung, K. C., “Influence of channel height on heat transfer in rectangular channels with skewed ribs at different bleed conditions,” Int. J. of Heat and Mass Transfer, Vol. 50, Issues 23-24, 2007, pp. 4581-4599.
27. Huang, R. F. and Chang, K. T., “Evolution and turbulence properties of self-sustained transversely oscillating flow induced by fluidic oscillator,” Journal of Fluids Engineering (ASME Transactions), Vol. 129, No. 8, 2007, pp. 1038-1047.
28. Huang, R. F., Chen, H. D., and Hung, C.-H., “Effects of walk-by and sash movement on aerodynamics and contaminant leakage of air curtain-isolated fume hood,” Industrial Health, Vol. 45, No. 4, 2007, pp. 804-816.
29. Tseng, L.-C., Huang, R. F., Chen, C.-C., and Chang, C.-P., “Effects of sash movement and walk-bys on aerodynamics and performance of laboratory fume cupboards,” Industrial Health, Vol. 45, No. 2, 2007, pp. 199-208.
30. Huang, R. F., Wu, Y. D., Chen, H. D., Chen, C.-C., Chen, C.-W., Chang, C. P., and Shih, T.-S., “Development and evaluation of air curtain fume cabinet with its considerations of aerodynamics,” Ann. Occupational Hygiene, Vol. 51, No. 2, 2007, pp. 189-206.
31. Tseng, L.-C., Huang, R. F., Chen, C.-C., and Chang, C.-P., “Aerodynamics and performance verifications of test methods for laboratory fume cupboards,” Ann. Occupational Hygiene, Vol. 51, No. 2, 2007, pp. 173-187.
32. Huang, R. F., Chen, J. M., and Hsu, C. M., “Modulation of surface flow and vortex shedding of a circular cylinder in subcritical regime by a self-excited vibrating rod,” Journal of Fluid Mechanics (JFM), Vol. 555, May 2006, pp. 321-352.
33. Tseng, L.-C., Huang, R. F., Chen, C.-C., and Chang, C.-P., “Correlation between airflow patterns and performance of laboratory fume hood,” Journal of Occupational and Environmental Hygiene, Vol. 3, No. 12, 2006, pp. 694-706.
34. Lan, J. and Huang, R. F., “Vorticity evolution mechanism in near field of a transverse jet,” JCIE, Vol. 29, No. 4, 2006, pp. 707-716.
35. Huang, R. F. and Chang, K. T., “Fluidic oscillation influences on vee-shaped bluff-body flow,” AIAA Journal (American Institute of Aeronautics and Astronautics), Vol. 43, No. 11, 2005, pp. 2319-2328.
36. Chen, K., Winter, M., and Huang, R. F., “Supersonic flow in miniature nozzle of planar configuration,” J. of Micromechanics and Microengineering (JMM), Vol. 15,  No. 8, 2005, pp. 1736-1744.
37. Huang, R. F. and Jen Lan, “Characteristic modes and evolution processes of shear-layer vortices in anelevated transverse jet,”Physics of Fluids, Vol. 17, No. 3, 2005, pp. 1-13.
38. Huang, R. F., Huang, C. W., Chang, S. B., Yang, H. S., Lin, T. W., and Hsu, W. Y., “Topological flow evolution in cylinder of a motored engine during intake and compression strokes,” Journal of Fluids and Structures, Vol. 20, No. 1, 2005, pp. 105-127.
39. Huang, R. F., Lin, S. Y., Jan, S. Y., Chen, Y.-K., Chen, C.-W., Yeh, W.-Y., Chang, C.-P., Shih, T.-S and Chen, C.-C., “Aerodynamic characteristics and design guidelines of push-pull ventilation systems,” Ann. Occupational Hygiene, Vol. 49, No. 1, 2005, pp. 1-15.
40. Huang, R. F., Liu, G. S., Lin, S. Y., and others, “Development and characterization of a wake-controlled exterior hood,” Journal of Occupational and Environmental Hygiene, Vol. 1, No. 12, 2004, pp. 769-778.
41. Huang, R. F. and Chang, K. T., “Oscillation frequency in wake of a vee-gutter,” AIAA Journal of Propulsion and Power (American Institute of Aeronautics and Astronautics), Vol. 20, No. 5, 2004, pp. 871-878.
42. Huang, R. F. and Tsai, F. C., “Flow and mixing characteristics of swirling wakes in blockage-effect regime,” Journal of Wind Engineering and Industrial Aerodynamics, Vol. 92, No. 2, 2004, pp. 199-214.
43. Huang, R. F. Liu, G. S., and others, “Effects of flange size on dividing streamline of exterior hoods in cross drafts,” Journal of Occupational and Environmental Hygene, Vol. 1, No. 5, 2004, pp. 283-288.
44. Chang, K. T. and Huang, R. F., “Development and characterization of jet-injected vee-gutter,” Journal of Mechanics, Vol. 20, No. 1, 2004, pp. 57-63.
45. Huang, R. F. and Hsieh, R. H., “Sectional near-wake flow structures of elevated jets in a crossflow,” AIAA Journal (American Institute of Aeronautics and Astronautics), Vol. 41, No. 8, 2003, pp. 1490-1499.
46. Huang, R. F. and Yen, S. C., “Axisymmetric swirling vortical wakes modulated by a control disc,” AIAA Journal (American Institute of Aeronautics and Astronautics), Vol. 41, No. 5, 2003, pp. 888-896.
47. Huang, R. F. and Chung, D. L., “Thermal design of a disk array system,” JCIE, Vol. 26, No. 5, 2003, pp. 565-573.
48. Yen, S. C. and Huang, R. F., “Flow control on swirling jets using a dual-disc blockage,” JCIE, Vol. 26, No. 4, 2003, pp. 435-442.
49. Hsieh, R. H. and Huang, R. F., “Tomographic flow structure of a round jet in a crossflow,” JCIE, Vol. 26, No. 1, 2003, pp. 71-80.
50. Huang, R. F. and R. H. Hsieh, “An experimental study of elevated round jets deflected in a crosswind,” Experimental Thermal and Fluid Science, Vol. 27, No. 3, 2002, pp. 77-86.
51. Huang, R. F. and Mao, S. W., “Separation control on an cantilever wing with a self-excited vibrating rod,” AIAA Journal of Aircraft (American Institute of Aeronautics and Astronautics), Vol. 39, No. 4, 2002, pp. 609-615.
52. Huang, R. F. and Tsai. F. C., “Flow field characteristics of swirling double concentric jets,” Experimental Thermal and Fluid Science, Vol. 25, No. 3, Oct. 2001, pp. 151-161.
53. Huang, R. F. and Sir, S. Y., “Capture envelopes of rectangular hoods in cross drafts,” America Industrial Hygiene Association Journal (AIHAJ), Vol. 62, Sep./Oct. 2001, pp. 563-571. This paper received the award of The Best Engineering Paper for Year 2001, which was selected by the Engineering Committee of the American Industrial Hygiene Association. The award was presented at AICHE 2002 inSan Diego, California, USA on June 5, 2002.
54. Mao, S. W. and Huang, R. F., “Frequency of unsteady motions of a wing,” Transactions of AASROC, Vol. 33, No. 3, 2001, pp. 155-162.
55. Tsai, F. C. and Huang, R. F., “Topological flow structures of annular swirling jets,” Journal of Mechanics, Vol. 17, No. 3, Sep. 2001, pp. 349-356.
56. Huang, R. F., Wu, J. Y., Jeng, J. H., and Chen, R.-C., “Surface flow and vortex shedding of an impulsively started wing,” Journal of Fluid Mechanics (JFM), Vol. 441, Aug. 2001, pp. 265-292.
57. Huang, R. F. and Tsai, F. C., “Observations of swirling flows behind circular discs,” AIAA Journal (American Institute of Aeronautics and Astronautics), Vol. 39, No. 6, June 2001, pp. 1106-1112.
58. Huang, R. F. and Chen, J. L., “The capture envelope of a flanged circular hood in cross drafts,” America Industrial Hygiene Association Journal (AIHAJ), Vol. 62, March/April 2001, pp. 199-207.
59. Wu, J. P. and Huang, R. F., “Combustion characteristics of a jet flame in cross flow at incidences,” CSME Journal, Vol. 22, No. 2, 2001, pp. 131-140.
60. Chen, Y. K., Huang, R. F., Chen, J. L., and Chen, C. W., “Capture envelope of a hood opening under crosswind condition – a wind tunnel experiment,” IOSH Journal, Vol. 9, No. 2, 2001, pp. 211-224.
61. Chen, Y. K., Huang, R. F., and Chen, C. W., “Capture envelope of a hood opening under crosswind condition – a numerical approach,” IOSH Journal, Vol. 9, No. 2, 2001, pp. 225-239.
62. Huang, R. F. and Lin, C. L., “Velocity fields of nonpremixed bluff-body stabilized flames,” J. of Energy Resources Technology (ASME Transcations), Vol. 122, June 2000, pp. 88-93.
63. Huang, R. F. and Lee, H. W., “Turbulence effect on frequency characteristics of vortex shedding in wake of wing,” AIAA Journal (American Institute of Aeronautics and Astronautics), Vol. 38, No. 1, 2000, pp. 87-94.
64. Huang, R. F. and Lin, C. L., “Velocity field of a bluff-body wake,” Wind Engineering and Industrial Aerodynamics, Vol. 85, No. 1, 2000, pp. 31-45.
65. Huang, R. F. and Lee, H. W., “Effects of Free-Stream Turbulence on Wing Surface Flow and Aerodynamic Performance,” AIAA Journal of Aircraft (American Institute of Aeronautics and Astronautics), Vol. 36, No. 6, 1999, pp. 965-972.
66. Huang, R. F., Hsu, M. P., and Chen, W. L., “Experimental design of tuning pipe of a two-stroke engine for motorcycles,” CSME Journal, Vol. 20, No. 5, 1999, pp. 467-476.
67. Huang, R. F., Hsu, M.-P., Chen, W. L., and Lee, K., “On the tuning pipe of a two-stroke engine for scooter-type motorcycles,” Journal of Mechanical Engineering Science (Proceedings of the Institution of Mechanical Engineers, Part C), Vol. 213, 1999, pp. 861-866.
68. Huang, R. F., Yen, S. C., Huang, C. Y., Wu, J. Y., and Chen, R. C., “PIV measurements of vortical evolution on an impulsively started wing,” Journal of Flow Visualization and Image Processing, Vol. 6, April 1999, pp. 1-17.
69. Huang, R. F. and Wang, S. M., “Characteristic flow modes of wake-stabilized jet flames in transverse air stream,” Combustion and Flame, Vol. 117, No. 1/2. 1999, pp. 59-77.
70. Lee, H. W. and Huang, R. F., “Effects of Reynolds number and free-stream turbulence on aerodynamic performance of a cantilever wing,” CSME Journal, Vol. 20, No. 1, 1999, pp. 35-44.
71. Huang, R. F., Hseih, M. K., Wang, A.-B., Lin, H. S., Chang, C. L., Wong, Y. S., and Li, K.-C., “A study on improving performance of No. 1 EP of Hsieh-Ho Power Station,” J. of Taipower Engineering, Vol. 613, pp. 1-13, 1999. (in Chinese)
72. Hunag, R. F. and Lee, H. W., “Frequency selection of wake flow behind a NACA 0012 wing,” Journal of Marine Science and Technology, Vol. 6, No. 1, 1998, pp. 29-37.
73. Huang, R. F. and Lin, C. L., “Flow characteristics and shear-layer vortex shedding of double concentric jets,” AIAA Journal (American Institute of Aeronautics and Astronautics), Vol. 35, No. 5, 1997, pp. 887-892.
74. Sava?, Ö, Huang, R. F., and Gollahalli, S. R., “Structure of the flow field of a nonpremixed gas jet flame in cross-flow,” J. of Energy Resources Technology (ASME Transactions), Vol. 119, June 1997, pp. 137-144.
75. Huang, R. F., Yang, J.-T., and Lee, P.-C., “Flame and flow characteristics of double concentric jets,” Combustion and Flame, Vol. 108, No. 1, 1997, pp. 9-23.
76. Huang, R. F. and Yang, M. J., “Thermal and concentration fields of burner-attached jet flames in cross flow,” Combustion and Flame, Vol. 105, No. 3, 1996, pp. 211-224.
77. Huang, R. F., Shy, W. W., Lin, S. W., and Hsiao, F.-B., “Influence of surface flow on aerodynamic loads of a cantilever wing,” AIAA Journal (American Institute of Aeronautics and Astronautics), Vol. 34, No. 3, 1996, pp. 527-532.
78. Huang , R. F. and Wu, J. P., “Flow visualization of wake-stabilized flames in cross flow,” Journal of Flow Visualization & Image Processing, Vol. 3, No. 1, 1996, pp. 39-49.
79. Huang, R. F. and Sheen, H. J., “The flow and thermal structures of a turbulent combusting jet in cross-flow,” CSME Journal, Vol. 17, No. 4, 1996, pp. 343-351.
80. Huang, R. F. and Lin, C. L., “Vortex shedding and shear-layer instability of wing at low Reynolds numbers,” AIAA Journal (American Institute of Aeronautics and Astronautics), Vol. 33, No. 8, 1995, pp. 1398-1403.
81. Huang, R. F. and Bear, G. M., “The axisymmetric recirculation wake flushed by central jet,” Journal of Wind Engineering and Industrial Aerodynamics, Vol. 56, No. 1, 1995, pp. 41-54.
82. Huang, R. F. and Lin, C. L., “On the axial length of circulation zone behind a disc with/without central jet,” CSME Journal, Vol. 16, No. 2, 1995, pp. 99-107.
83. Huang, R. F. and Lin, C. L., “Characteristic modes and thermal structure of nonpremixed circular-disc stabilized flames,” Combustion Science and Technology, Vol. 100, No. 1-6, 1994, pp. 123-135.
84. Huang, R. F. and Lin, C. L, “Visualized flow patterns of double concentric jets at low annulus velocities,” AIAA Journal (American Institute of Aeronautics and Astronautics), Vol. 32, No. 9, 1994, pp. 1868-1874.
85. Huang, R. F. and Chang, J. M., “The stability and visualized flame and flow structures of a combusting jet in cross flow,” Combustion and Flame, Vol. 98, No. 3, 1994, pp. 267-272.
86. Huang, R. F., Chen, C. F., and Bear, G. M., “Smoke-wire flow visualization of the near-wake region behind a circular disc at low Reynolds numbers,” Experiments in Fluids, Vol. 17, No. 4, 1994, pp. 259-266.
87. Huang, R. F. and Chang, J. M., “Coherent structure in a combusting jet in cross-flow,” AIAA Journal (American Institute of Aeronautics and Astronautics), Vol. 32, No. 7, 1994, pp. 1120-1125.
88. Gollahalli, S. R., Sava?, Ö, and Huang, R. F., “Structure of attached and lifted gas jet flames in hysteresis region,” Twenty-first Symposium (Int.) on Combustion, The Combustion Institute, Pittsburgh, PA, U.S.A., 1986, pp. 1463-1471.
89. Chen, L. T. and Huang, R. F., “Boiling heat transfer to R-22/DMF mixtures,” Int. Comm. Heat Mass Transfer, Vol. 12, No. 6, 1985, pp. 541-551.
90. Chen, L. T. and Huang, R. F., “The cycle analysis of a R-22/DMF absorptive refrigeration system,” Int. Comm. Heat Mass Transfer, Vol. 12, No. 6, 1985, pp. 737-746.

91. Chen, K., Winter, M., and Huang*, R. F., “Supersonic flow in miniature nozzle of planar configuration,” J. of Micromechanics and Microengineering (JMM), Vol. 15, No. 8, 2005, pp. 1736-1744

92. Huang*, R. F. and Lan, J., “Characteristic modes and evolution processes of shearlayer vortices in an elevated transverse jet,” Physics of Fluids, Vol. 17, No. 3, 2005, pp. 1-13.

93. Huang*, R. F., Huang, C. W., Chang, S. B., Yang, H. S., Lin, T. W., and Hsu, W. Y., “Topological flow evolution in cylinder of a motored engine during intake and compression strokes,” Journal of Fluids and Structures, Vol. 20, No. 1, 2005, pp. 105-127.

94. Huang*, R. F., Lin, S. Y., Jan, S. Y., Chen, Y.-K., Chen, C.-W., Yeh, W.-Y., Chang, C.-P., Shih, T.-S, and Chen, C.-C., “Aerodynamic characteristics and design guidelines of push-pull ventilation systems,” Ann. Occupational Hygiene, Vol. 49, No. 1, 2005, pp. 1-15.

95. Huang*, R. F., Liu, G. S., Lin, S. Y., et al., “Development and characterization of a wake-controlled exterior hood,” Journal of Occupational and Environmental Hygiene, Vol. 1, No. 12, 2004, pp. 769-778.

96. Huang*, R. F. and Chang, K. T., “Oscillation frequency in wake of a vee-gutter,” Journal of Propulsion and Power (American Institute of Aeronautics and Astronautics), Vol. 20, No. 5, 2004, pp. 871-878.

97. Huang*, R. F. and Tsai, F. C., “Flow and mixing characteristics of swirling wakes in blockage-effect regime,” Journal of Wind Engineering and Industrial Aerodynamics, Vol. 92, No. 2, 2004, pp. 199-214.

98. Huang*, R. F., Liu, G. S., et al., “Effects of flange size on dividing streamline of exterior hoods in cross drafts,” Journal of Occupational and Environmental Hygene, Vol. 1, No. 5, 2004, pp. 283-288.

99. Chang, K. T. and Huang*, R. F., “Development and characterization of jet-injected vee-gutter,” Journal of Mechanics, Vol. 20, No. 1, 2004, pp. 57-63.

100. Huang*, R. F. and Hsieh, R. H., “Sectional near-wake flow structures of elevated jets in a crossflow,” AIAA Journal (American Institute of Aeronautics and Astronautics), Vol. 41, No. 8, 2003, pp. 1490-1499.

101. Huang*, R. F. and Yen, S. C., “Axisymmetric swirling vortical wakes modulated by a control disc,” AIAA Journal (American Institute of Aeronautics and Astronautics), Vol. 41, No. 5, 2003, pp. 888-896.

102. Huang*, R. F. and Chung, D. L., “Thermal design of a disk array system,” JCIE, Vol. 26, No. 5, 2003, pp. 565-573. 14 103. Yen, S. C. and Huang*, R. F., “Flow control on swirling jets using a dual-disc blockage,” JCIE, Vol. 26, No. 4, 2003, pp. 435-442.

104. Hsieh, R. H. and Huang*, R. F., “Tomographic flow structure of a round jet in a crossflow,” JCIE, Vol. 26, No. 1, 2003, pp. 71-80.

105. Huang*, R. F. and Hsieh, R. H., “An experimental study of elevated round jets deflected in a crosswind,” Experimental Thermal and Fluid Science, Vol. 27, No. 3, 2003, pp. 77-86.

106. Huang*, R. F. and Mao, S. W., “Separation control on an cantilever wing with a selfexcited vibrating rod,” AIAA Journal of Aircraft (American Institute of Aeronautics and Astronautics), Vol. 39, No. 4, 2002, pp. 609-615.

107. Huang*, R. F. and Tsai. F. C., “Flow field characteristics of swirling double concentric jets,” Experimental Thermal and Fluid Science, Vol. 25, No. 3, 2001, pp. 151-161.

108. Huang*, R. F. and Sir, S. Y., “Capture envelopes of rectangular hoods in cross drafts,” America Industrial Hygiene Association Journal (AIHAJ), Vol. 62, Sep./Oct. 2001, pp. 563-571. This paper received the award of The Best Engineering Paper for Year 2001, which was selected by the Engineering Committee of the American Industrial Hygiene Association. The award was presented at AICHE 2002 in San Diego, California, USA on June 5, 2002.

109. Mao, S. W. and Huang*, R. F., “Frequency of unsteady motions of a wing,” Transactions of AASROC, Vol. 33, No. 3, 2001, pp. 155-162.

110. Tsai, F. C. and Huang, R. F., “Topological flow structures of annular swirling jets,” Journal of Mechanics, Vol. 17, No. 3, 2001, pp. 349-356.

111. Huang*, R. F., Wu, J. Y., Jeng, J. H., and Chen, R.-C., “Surface flow and vortex shedding of an impulsively started wing,” Journal of Fluid Mechanics (JFM), Vol. 441, Aug. 2001, pp. 265-292.

112. Huang*, R. F. and Tsai, F. C., “Observations of swirling flows behind circular discs,” AIAA Journal (American Institute of Aeronautics and Astronautics), Vol. 39, No. 6, 2001, pp. 1106-1112.

113. Huang*, R. F. and Chen, J. L., “The capture envelope of a flanged circular hood in cross drafts,” America Industrial Hygiene Association Journal, Vol. 62, March/April 2001, pp. 199-207.

114. Wu, J. P. and Huang*, R. F., “Combustion characteristics of a jet flame in cross flow at incidences,” CSME Journal, Vol. 22, No. 2, 2001, pp. 131-140.

115. Chen, Y. K., Huang*, R. F., Chen, J. L., and Chen, C. W., “Capture envelope of a hood opening under crosswind condition – a wind tunnel experiment,” IOSH Journal, Vol. 9, No. 2, 2001, pp. 211-224.

116. Chen, Y. K., Huang*, R. F., and Chen, C. W., “Capture envelope of a hood opening under crosswind condition – a numerical approach,” IOSH Journal, Vol. 9, No. 2, 2001, pp. 225-239.

117. Huang*, R. F. and Lin, C. L., “Velocity fields of nonpremixed bluff-body stabilized flames,” J. of Energy Resources Technology (ASME Transcations), Vol. 122, June 2000, pp. 88-93.

118. Huang*, R. F. and Lee, H. W., “Turbulence effect on frequency characteristics of vortex shedding in wake of wing,” AIAA Journal (American Institute of Aeronautics and Astronautics), Vol. 38, No. 1, 2000, pp. 87-94.

119. Huang*, R. F. and Lin, C. L., “Velocity field of a bluff-body wake,” Wind Engineering and Industrial Aerodynamics, Vol. 85, No. 1, 2000, pp. 31-45. 15

120. Huang*, R. F. and Lee, H. W., “Effects of Free-Stream Turbulence on Wing Surface Flow and Aerodynamic Performance,” AIAA Journal of Aircraft (American Institute of Aeronautics and Astronautics), Vol. 36, No. 6, 1999, pp. 965-972.

121. Huang*, R. F., Hsu, M. P., and Chen, W. L., “Experimental design of tuning pipe of a two-stroke engine for motorcycles,” CSME Journal, Vol. 20, No. 5, 1999, pp. 467- 476.

122. Huang*, R. F., Hsu, M.-P., Chen, W. L., and Lee, K., “On the tuning pipe of a twostroke engine for scooter-type motorcycles,” Journal of Mechanical Engineering Science (Proceedings of the Institution of Mechanical Engineers, Part C), Vol. 213, 1999, pp. 861-866.

123. Huang*, R. F., Yen, S. C., Huang, C. Y., Wu, J. Y., and Chen, R. C., “PIV measurements of vortical evolution on an impulsively started wing,” Journal of Flow Visualization and Image Processing, Vol. 6, April 1999, pp. 1-17.

124. Huang*, R. F. and Wang, S. M., “Characteristic flow modes of wake-stabilized jet flames in transverse air stream,” Combustion and Flame, Vol. 117, No. 1/2. 1999, pp. 59-77.

125. Lee, H. W. and Huang*, R. F., “Effects of Reynolds number and free-stream turbulence on aerodynamic performance of a cantilever wing,” CSME Journal, Vol. 20, No. 1, 1999, pp. 35-44.

126. Huang*, R. F., Hseih, M. K., Wang, A.-B., Lin, H. S., Chang, C. L., Wong, Y. S., and Li, K.-C., “A study on improving performance of No. 1 EP of Hsieh-Ho Power Station,” J. of Taipower Engineering, Vol. 613, pp. 1-13, 1999. (in Chinese)

127. Hunag*, R. F. and Lee, H. W., “Frequency selection of wake flow behind a NACA 0012 wing,” Journal of Marine Science and Technology, Vol. 6, No. 1, 1998, pp. 29-37.

128. Huang*, R. F. and Lin, C. L., “Flow characteristics and shear-layer vortex shedding of double concentric jets,” AIAA Journal (American Institute of Aeronautics and Astronautics), Vol. 35, No. 5, 1997, pp. 887-892.

129. Sava?*, Ö ., Huang, R. F., and Gollahalli, S. R., “Structure of the flow field of a nonpremixed gas jet flame in cross-flow,” J. of Energy Resources Technology (ASME Transactions), Vol. 119, June 1997, pp. 137-144.

130. Huang*, R. F., Yang, J.-T., and Lee, P.-C., “Flame and flow characteristics of double concentric jets,” Combustion and Flame, Vol. 108, No. 1, 1997, pp. 9-23.

131. Huang*, R. F. and Yang, M. J., “Thermal and concentration fields of burner-attached jet flames in cross flow,” Combustion and Flame, Vol. 105, No. 3, 1996, pp. 211- 224.

132. Huang*, R. F., Shy, W. W., Lin, S. W., and Hsiao, F.-B., “Influence of surface flow on aerodynamic loads of a cantilever wing,” AIAA Journal (American Institute of Aeronautics and Astronautics), Vol. 34, No. 3, 1996, pp. 527-532. 133. Huang*, R. F. and Wu, J. P., “Flow visualization of wake-stabilized flames in cross flow,” Journal of Flow Visualization & Image Processing, Vol. 3, No. 1, 1996, pp. 39-49.

134. Huang*, R. F. and Sheen, H. J., “The flow and thermal structures of a turbulent combusting jet in cross-flow,” CSME Journal, Vol. 17, No. 4, 1996, pp. 343-351.

135. Huang*, R. F. and Lin, C. L., “Vortex shedding and shear-layer instability of wing at low Reynolds numbers,” AIAA Journal (American Institute of Aeronautics and Astronautics), Vol. 33, No. 8, 1995, pp. 1398-1403.

136. Huang*, R. F. and Bear, G. M., “The axisymmetric recirculation wake flushed by central jet,” Journal of Wind Engineering and Industrial Aerodynamics, Vol. 56, No. 1, 1995, pp. 41-54. 16

137. Huang*, R. F. and Lin, C. L., “On the axial length of circulation zone behind a disc with/without central jet,” CSME Journal, Vol. 16, No. 2, 1995, pp. 99-107.

138. Huang*, R. F. and Lin, C. L., “Characteristic modes and thermal structure of nonpremixed circular-disc stabilized flames,” Combustion Science and Technology, Vol. 100, No. 1-6, 1994, pp. 123-135.

139. Huang*, R. F. and Lin, C. L, “Visualized flow patterns of double concentric jets at low annulus velocities,” AIAA Journal (American Institute of Aeronautics and Astronautics), Vol. 32, No. 9, 1994, pp. 1868-1874.

140. Huang*, R. F. and Chang, J. M., “The stability and visualized flame and flow structures of a combusting jet in cross flow,” Combustion and Flame, Vol. 98, No. 3, 1994, pp. 267-272.

141. Huang*, R. F., Chen, C. F., and Bear, G. M., “Smoke-wire flow visualization of the near-wake region behind a circular disc at low Reynolds numbers,” Experiments in Fluids, Vol. 17, No. 4, 1994, pp. 259-266.

142. Huang*, R. F. and Chang, J. M., “Coherent structure in a combusting jet in crossflow,” AIAA Journal (American Institute of Aeronautics and Astronautics), Vol. 32, No. 7, 1994, pp. 1120-1125. 143. Gollahalli*, S. R., Sava?, Ö ., and Huang, R. F., “Structure of attached and lifted gas jet flames in hysteresis region,” Twenty-first Symposium (Int.) on Combustion, The Combustion Institute, Pittsburgh, PA, U.S.A., 1986, pp. 1463-1471.

144. Chen*, L. T. and Huang, R. F., “Boiling heat transfer to R-22/DMF mixtures,” Int. Comm. Heat Mass Transfer, Vol. 12, No. 6, 1985, pp. 541-551.

145. Chen*, L. T. and Huang, R. F., “The cycle analysis of a R-22/DMF absorptive refrigeration system,” Int. Comm. Heat Mass Transfer, Vol. 12, No. 6, 1985, pp. 737-746.

研討會論文

1. Huang, R. F. and K. T. Chang, “Flow characteristics of a self-sustained transversely oscillating jet,” The Eigth Pacific Symposium on Flow Visualization and Image Processing (PSFVIP-8), Moscow, Russia, Aug. 20 - 23, 2011.
2. Huang, R. F. and C. M. Hsu, “Effects of crossflow on characteristic modes of a pulsed jet,” The Fourth International Symposium on Physics of Fluids (ISPF-4), Lijiang, China, June 6-9, 2011.
3. Huang, R. F. and C. M. Hsu, “In-cylinder tumble flows and performance of a motorcycle engine with circular and elliptic intake ports,” The Fourth Mechanical Engineering International Research Conference (MEIRC-4), Cebu, Philippines, January 12-14, 2011.
4. Huang, R. F., “Aerodynamics and containment performances of conventional and air-curtain Fume Hoods,” The Fourth Mechanical Engineering International Research Conference (MEIRC-4), Cebu, Philippines, January 12-14, 2011.
5. Huang, R. F. and J.-K. Chen, “Enhancing engine performance by manipulating in-cylinder tumble and swirl flow,” The 8th Asia-Pacific Conference on Combustion (ASPACC-10), Hyderabad, India, December 10-13, 2010.
6. Huang, R. F. and Chou, C. Y., “Improving performance of biological safety cabinet,” The 9th International Conference on Industrial Ventilation (Vent 2009), ETH Zurich, Switzerland, October 18-21, 2009.
7. Huang, R. F., “Temperature distributions and combustion efficiency of non-premixed reacting swirling-wake,” The Seventh Asia-Pacific Conference on Combustion (ASPACC-09), Taipei, Taiwan, May 24-27, 2009.
8. Huang, R. F. and Lin, K. H., “In-cylinder tumble flows of a motorcycle engine with circular and elliptic intake ports,” The 3rd International Symposium on Advanced Fluid/Solid Science and Technology in Experimental Mechanics (ISEM 2008), Tainan, Taiwan, Dec. 8-10, 2008.
9. Huang, R. F. and Chen, H. D., “Aerodynamics and containment performance of the air-curtain fume hood,” The 29th Advanced Building Ventilation and Environmental Technology Conference (AIVC 2008), Kyoto, Japan, Oct. 14-16, 2008.
10. Huang, R. F. and Yen, S. C., “Aerodynamics and thermal structure of non-premixed reacting swirling-wake,” The 19th International Symposium on Transport Phenomena (ISTP-19), Reykjavik, Iceland, August 17-20, 2008.
11. Huang, R. F., Chen, C.-C., and Chen, C. W., “Aerodynamics and containment evaluation of air curtain fume cabinet,” The 2008 International Occupation Health Association (IOHA 2008), Taipei, Taiwan, Feb. 18 - 22, 2008.
12. Huang, R. F., Yen, S. C., and Chang, K. T., “On some passive flow control methods with/without self-sustained oscillating mechanism,” Keynote speaker, The 18th International Symposium on Transport Phenomena (ISTP-18), KAIST, Daejeon, Korea, August 26-30, 2007.
13. Huang, R. F. and Chang, K. T., “Cavity-driven transversely oscillating planar jets,” The 17th International Symposium on Transport Phenomena (ISTP-17), Toyama International Conference Center, Toyama, Japan, September 4-8, 2006.
14. Huang, R. F., Chen, C. W., Chang C. P., and Shih, T. S., “Development of an air curtain-isolated chemical fume hood with considerations of aerodynamics,” The 8th International Conference on Practical Applications of Ventilation for Emission and Exposure Control (VENT 2006), Chicago, U.S.A., May 13-18, 2006.
15. Huang, R. F. and Lan, J., “Shear layer vortices in a crossflow-deflected jet.” The 6th World Conference on Experimental Heart Transfer, Fluid Mechanics, and Thermodynamics (ExHFT-6), Matsushima, Miyagi, Japan, April 17-21, 2005.
16. Huang, R. F. and Lin, Sing Yie, “Aerodynamics and design guidelines of push-pull ventilation systems.” The USC Engineering Conference 2005, University of San Carlos, Cebu City, Philippines, March 4-6, 2005.
17. Huang, R. F. and Chang, K. T., “Manipulating a vee-shaped bluff-body wake with a fluidic oscillator.” The 21st International Congress of Theoretical and Applied Mechanics (21 ICTAM 2004, established by IUTAM), Warsaw University of Technology, Warsaw, Poland, Oct. 15-21, 2004.
18. Huang, R. F., Huang, C. W, and Chang, S. B., “Toplogical flow evolutions in cylinder of a motored engine during intake and compression strokes.” The 15th International Symposium on Transport Phenomena (ISTP-15), Bangkok, Thailand, May 9-13, 2004.
19. Huang, R. F. and Hsieh, R. H., “Flow visualization and LDV measurement on near-wake of elevated jets in a crossflow.” The 4th Pacific Symposim on Flow Visualization and Image Processing (PSFVIP 4), Chamonix, France, June 3-5, 2003.
20. Huang, R. F., Wu, C. S., and Jeng, J. H., “Modulaing surface flows of a wing started from rest using a near-leading edge control rod.” The 10th International Symposim on Flow Visualization (ISFV 10), Kyoto, Japan, Aug. 26-29, 2002.
21. Huang, R. F. and Chung, D. L., “Thermal design of a disk-array system.” The 2002 International Conference on Thermal, Mechanics, Thermomechanical Phenomena in Electronics (Itherm 2002), San Diego, USA, May 29 - June 1, 2002.
22. Huang, R. F. and Hsieh, R. H., “Near-wake flow structures of elevated jets in a crossflow.” The First Taiwan-Japan Workshop on Mechanical and Aerospace Engineering, Tainan, Taiwan, Dec. 19, 2001.
23. Huang, R. F. and Tsai, F. C., “Flow structures of swirling wakes behind circular discs.” The Fifth World Conference on Experimental Heat Transfer, Fluid Mechanics, and Thermodynamics (ExHFT-5), Thessaloniki, Greece, September 24-28, 2001.
24. Huang, R. F. and Mao, S. W., “Separation control on an cantilever wing with a self-excited vibrating rod.” The Taiwan-Japan Joint Workshop on Aerospace Mechanics, Hokkaido University, Hokkaido, Japan, Sep. 10-11, 2001.
25. Huang, R. F. and Wu, J. P., “Fuel processing capability of a jet flame in crossflow at incidences.” The Sixth International Conference on Technologies and Combustion for a Clean Environment (CleanAir 2001), Oporto, Portugal, July 9-12, 2001.
26. Huang, R. F. and Lin, C. L., “Velocity Measurements in Disc Stabilized Flames.” Paper presented at Eight International Conference on Laser Anemometry-Advances and Applications (EALA’99), Rome, Italy, September 6-9, 1999.
27. Huang, R. F., Yen, S. C., Huang, C. Y., Wu, J. Y., and Chen, R.-C., “Vortex evolution on an impulsively started wing.” The Second Pacific Symposium on Flow Visualization and Image Processing (PSFVIP-2), Honolulu, Hawaii, U.S.A., May 16-19, 1999.
28. Huang, R. F., Lin, C. L., and Lee, W.-B., “Flowfields of circular disc stabilized flame.” The Second Asia-Pacific Conference on Combustion (ASPACC-99), Tainan, Taiwan, May 9-12, 1999.
29. Huang, R. F. and Lee, H. W., “Characteristics of frequency selection in wake of a NACA 0012 wing model.” The Second Ankara International Aerospace Conference (AIA’98), Ankara, Turkey, September 9-11, 1998.
30. Lai, C. Y., Chih, C. C., and Huang, R. F., “Size characteristics of particulate matter by a two-stroke engine.” The Sixteenth Annual Conference of the American Association for Aerosol Research, Denver, Colorado, U.S.A., October 13-17, 1997.
31. Huang, R. F. and Lin, C. L., “Shear-layer vortex shedding of recirculation wake flushed by a central jet.” The Seventh International Conference on Laser Anemometry-Advances and Applications, Karlsruhe, Germany, September 8-11, 1997.
32. Huang, R. F. and Lin, C. L., "Flow structure and vortex shedding of a cantilever wing." The International Aerospace Congress 1995 (IAC'95), Melbourne, Australia, March 20-23, 1995.
33. Huang, R. F. and Lin, C. L., "Vortex shedding and shear-layer instability of a cantilever wing at low Reynolds numbers." AIAA Paper 95-0589, The 33rd Aerospace Sciences Meeting and Exhibit, Reno, U.S.A., January 1995.
34. Huang, R. F., Sava?, Ö, and Gollahalli, S. R., “Turbulence characteristics in the flow field of a nonpremixed gas jet flame in cross-flow.” The Energy and Environmental Expo ’95 - The Energy-Sources Technology Conference and Exhibition, Houston, Texas, U. S. A,, January 1995, Sponsored by The Petroleum Division, ASME. Also in Emerging Energy Technology, ASME PD-Vol. 66, ASME, 1995, pp. 11-19.
35. Huang, R. F. and Chang, J. M., "The coherent structure in the combusting jet flushed by cross-flow." AIAA Paper 94-2314, 25th AIAA Fluid Dynamics Conference, Colorado Springs, Colorado, U. S. A., June 1994.
36. Huang, R. F. and Lin, C. L., "Flow patterns of near-wake region behind a circular disc with central flushing jet." Proceeding of The Third Asian Symposium on Visualization, Chiba, Japan, May 1994.
37. Huang, R. F. and Chang, J. M., "The stability and visualized flame and flow structures of a combusting jet in cross flow." Proceedings of the Sixth International Conference on Flow Measurement (FLOMEKO '93), pp. 604-611, Korea Research Institute of Standards and Science, 1993. Conference held at Seoul, Korea on October 1993.
38. Huang, R. F., Sava?, Ö, and Gollahalli, S. R., "Flow field in the near burner region of a partially lifted turbulent gas jet flame in cross flow." ASME Winter Annual Meeting, Anaheim, CA, U.S.A., November 1992. Also in Heat and Mass Transfer in Fire and Combustion Systems, ASME HDT-223, ASME, 1992, pp. 105-113.
39. Huang, R. F., Sava?, Ö, and Gollahalli, S. R., "Lift-off characteristics of diffusion flames," The Seventh Annual Symposium of AIAA/ASME joint meeting, Norman, Oklahoma, 1985.

著作

1. Huang, R. F., Development of inlet port angle design methodology by optimizing in-cylinder flow, Project Report submitted to Sang Yang Industries, Hsing Fong, Hsing Chu, Taiwan, June 2010. (in Chinese)
2. Huang, R. F., Performance of air-curtain fume hood under high-temperature operation. Project Report submitted to IOSH, Taipei, Taiwan, December 2009. (in Chinese)
3. Huang, R. F., Tests and evaluations of highly risky industrial ventilation facilities. Annual project report submitted to Ministry of Labor Affairs, December 2009. (in Chinese)
4. Huang, R. F., Development of GDI technology in motorcycle engine. Project report submitted to Kwang Yang Industries, Kaohsiung, Taiwan, January 2009. (in Chinese)
5. Huang, R. F., Parametric study of biological safety cabinet. Project Report submitted to IOSH, Taipei, Taiwan, Dec. 2009. (in Chinese).
6. Huang, R. F., Improvement of exhausted air pollution (II). Project report submitted to the Ministry of Labor Affair, Taipei, Taiwan, December 2008. (in Chinese)
7. Huang, R. F., Development of GDI technology in motorcycle engine. Project report submitted to Kwang Yang Industries, Kaohsiung, Taiwan, June 2008. (in Chinese)
8. Huang, R. F., Parametric study of biological safety cabinet. Project Report submitted to IOSH, Taipei, Taiwan, Dec. 2007. (in Chinese).
9. Huang, R. F., Reduction of temperature magnitude and uniformity of a four-stroke-cycle, water-cooled gasoline engine. Project Report submitted to Sang Yang Industries, Hsing Fong, Hsing Chu, Taiwan, July 2007. (in Chinese)
10. Huang, R. F., Diagnostics of conventional capture efficiency of chemical hood (III). Project Report submitted to Environmental Protection Group, Taipei, Taiwan, May, 2007. (in Chinese)
11. Huang, R. F., Improvement of exhausted air pollution (I). Project report submitted to the Ministry of Labor Affair, Taipei, Taiwan, August 2007. (in Chinese)
12. Huang, R. F., Diagnostics of conventional capture efficiency of chemical hood (II). Project Report submitted to Environmental Protection Group, Taipei, Taiwan, May 2006. (in Chinese)
13. Huang, R. F., Optimized Simulation of a dynamic gas flow. Project report submitted to Metal Center, Taipei, Taiwan, June 2006. (in Chinese)
14. Huang, R. F., Improvement of temperature distributions and cooling fan performance of a four-stroke-cycle gasoline engine. Project Report submitted to Kwang Yang Industries, Kaohsiung, Taiwan, June 2005. (in Chinese)
15. Huang, R. F., Diagnostics of conventional capture efficiency of chemical hood (I). Project Report submitted to Environmental Protection Group, Taipei, Taiwan, May, 2005. (in Chinese)
16. Huang, R. F., Air curtain-isolated chemical hume hood. Project Report submitted to IOSH, Taipei, Taiwan, Dec. 2004. (in Chinese).
17. Huang, R. F., Development of flow conditioner for linking fan and CPU cooler. Project Report submitted to ITRI, Hsing Chu, Taiwan, December 2004. (in Chinese)
18. Huang, R. F., Effects of deflection valve on the in-cylinder flows of a V-2 engine. Project Report submitted to ITRI, Hsing Chu, Taiwan, December 2004. (in Chinese)
19. Huang, R. F., Slicing the tumble and swirl flow motions in a four valve, four cylinder engine. Project Report submitted to Sang Yang Industries, Hsing Fong, Hsing Chu, Dec. 2004. (in Chinese)
20. Huang, R. F., Development of push-pull ventilation hood for pollutant removing from the large-scale chemical tank. Project Report submitted to IOSH, Taipei, Taiwan, Dec. 2003,. (in Chinese).
21. Huang, R. F., In-cylinder flow detection using optical method. Project Report submitted to Sang Yang Industry, Taipei, Taiwan, Dec. 2003. (in Chinese)
22. Huang, R. F., PIV measurements of fan flows. Project Report submitted to ITRI, Hsing Chu, Taiwan, December 2003. (in Chinese)
23. Huang, R. F., PIV development for small-scale flow field. Project Report submitted to ITRI, Hsing Chu, Taiwan, December 2003. (in Chinese)
24. Huang, R. F., Flows in a V-type motor cycle engine. Project Report submitted to ITRI, Hsing Chu, Taiwan, December 2003. (in Chinese)
25. Huang, R. F., Development of flat-plate heat transmitter, Project Report submitted to Glacier Technology, Taipei, Taiwan, June 2003. (in Chinese)
26. Huang, R. F., PIV diagnostics of in-cylinder flows. Project Report submitted to Kwang Yang Industries, Kaohsiung, Taiwan, June 2003. (in Chinese)
27. Huang, R. F., Design model of a dispersion hood. Project Report submitted to IOSH, Taipei, Taiwan, December 2002. (in Chinese)
28. Huang, R. F., Development of diagnostics method for a micro-flow field, Project Report submitted to ITRI, Hsing Chu, Taiwan, December 2002. (in Chinese)
29. Chern, M. J. and Huang, R. F., Control of a ball valve. Project Report submitted to Metal Center, Taipei, Taiwan, December, 2002. (in Chinese)
30. Huang, R. F., Aerodynamics performance of a micro-airplane. Project Report submitted to ITRI, Hsing Chu, Taiwan, December 2002. (in Chinese)
31. Huang, R. F., Development of in-cylinder flow diagnostics techniques. Project Report submitted to Sang Yang Industries, Taipei, Taiwan, April 2002. (in Chinese)
32. Huang, R. F., Development of cooling system of the disk arrays. Project Report submitted to Delta Electronics, Chung Li, Taiwan, March 2002. (in Chinese)
33. Huang, R. F., Application of CFD on electronic cooling, Project Report submitted to Delta Electronics, Chung Li, Taiwan, March 2001. (in Chinese)
34. Huang, R. F., Acooling design of an electronic package. Project Report submitted to Ten-Ming Electronics, Taipei, Taiwan, April 2001. (in Chinese)
35. Huang, R. F., Application of laser techniques to measurements of swirl motions. Project Report submitted to Kwang Yang Industries, Kaohsiung, Taiwan, December 2001. (in Chinese)
36. Huang, R. F., Effect of flange on the capture efficiency of a suction hood. Project Report submitted to IOSH, Taipei, Taiwan, December 2001.
37. Chern, M. J. and Huang, R. F., Visualization of inside flows in a ball valve. Project Report submitted to Metal Center, Taipei, Taiwan, December 2001. (in Chinese)
38. Huang, R. F., Lase-light sheet flow visualization in branching pipes. Project Report submitted to IOSH, Taipei, Taiwan, November 2001. (in Chinese)
39. Huang, R. F., Wind tunnel tests of a micro-airplane. Project report submitted to ITRI, December 2001. (in Chinese)
40. Huang, R. F. and Yang, J. T., Bluff-body effect on a swirl jet (II). Project Report submitted to National Science Council, NSC 89-TPC-7-011-001, Taipei, Taiwan, August 2000. (in Chinese)
41. Huang, R. F., Vortex and wake of an impulsively started wing. Project Report submitted to National Science Council, NSC 89-2212-E-011-017, Taipei, Taiwan, August 2000. (in Chinese)
42. Huang, R. F., Adjustment of the TOP BOY 50 two-stroke cycle engine. Project Report submitted to Kwang Yang Industries, Kaohsiung, Taiwan, June 2000. (in Chinese)
43. Huang, R. F., Capture envelopes of rectangular hoods. Project Report submitted to IOSH, Taipei, Taiwan, Feb. 2000. (in Chinese)
44. Huang, R. F., No. 2 duct flow of Hsing-Der Power plant. Project Report submitted to Taiwan Power Company, Taipei, Taiwan, Feb. 2000. (in Chinese)
45. Huang, R. F., Surface flows and control of a wing for micro airplane. Project Report submitted to ITRI, Taipei, Taiwan, May 2000. (in Chinese)
46. Huang, R. F. and Yang, J. T., Bluff-body effect on a swirl jet (I). Project Report submitted to National Science Council, NSC 88-TPC-7-011-001, Taipei, Taiwan, July 1999. (in Chinese)
47. Huang, R. F., Interaction between tip vortex and deflected jet. Project Report submitted to National Science Council, NSC 88-2212-E-011-011, July 1999. (in Chinese).
48. Huang, R. F., Pollution reduction of a two-stroke-cycle engine by stragetified-charge technique. Project Report submitted to Kwang Yang Industries, Kaohsiung, Taiwan, June 1999. (in Chinese)
49. Huang, R. F., Velocity, temperature, and particle measurements of Hsing Dar Thermal Power Station. Project Report submitted to Taiwan Power Company, Taipei, Taiwan, February 1999. (in Chinese)
50. Huang, R. F., Effect of cross draft on the capture zone of a flanged circular hood. Project Report submitted to IOSH, Taipei, Taiwan, May 1999. (in Chinese)
51. Huang, R. F., Performance improvement of EPs of Hsiehho Thermal Power Station. Project Report submitted to Taiwan Power Company, Taipei, Taiwan, March 1999. (in Chinese)
52. Huang, R. F., Development of a fuel-saving device for a two-stroke cycle engine, Project Report submitted to Kwang Yang Industry Co., Ltd., Kaohsiung, Taiwan, May 1998. (in Chinese)
53. Huang, R. F., Flow and combustion of a double concentric bluff-body combuster. Project Report submitted to National Science Council, NSC 87-2212-E-011-021, July 1998. (in Chinese)
54. Chih, C. C., and Huang, R. F., Size characteristics of particulate matter by a two-stroke engine. Project Report submitted to EPA, Taipei, Taiwan, June 1997. (in Chinese)
55. Huang, R. F. and Shy, M. P., Design of exhaust system of a two-stroke cycle engine. Project Report submitted to Kwang Yang Industry Co., Ltd., Kaohsiung, Taiwan, August 1996. (in Chinese)
56. Huang, R. F., Nonpremixed bluff-body stabilized flames. Project Report submitted to National Science Council, NSC-84-2212-E011-003, July 1995, Taipei, Taiwan. (in Chinese)
57. Huang, R. F., Interaction of flow structure and finite wings, Project Report submitted to National Science Council, NSC-84-2212-E011-040, July 1995, Taipei, Taiwan. (in Chinese)
58. Huang, R. F., Performance improvement of a two-stroke cycle engine. Project Report submitted to Kwang Yang Industry Co., Ltd., June 1995, Kaohsiung, Taiwan. (in Chinese)
59. Huang, R. F., Calibration of wind tunnel and hot-wire anemometers. Project Report submitted to National Institute for Occupational Safety and Health Council of Labor Affairs, June 1995, Taipei, Taiwan. (in Chinese)
60. Huang, R. F., Flow and flame characteristics behind a circular-disc flame stabilizer. Project Report submitted to National Science Council, NSC-83-0401-E011-004, August 1994, Taipei, Taiwan. (in Chinese)
61. Huang, R. F., Three dimensionally stretched unsteady structure in a combusting jet in cross-flow (II). Project Report submitted to National Science Council, NSC-82-0401-E011-193, February 1994, Taipei, Taiwan. (in Chinese)
62. Huang, R. F., Study of effects of fluid/solid interaction on finite wings in low speed subsonic air stream (I). Project Report submitted to National Science Council, NSC-82-0401-E011-1211, February 1994, Taipei, Taiwan. (in Chinese)
63. Huang, R. F., Calibration of wind tunnel and hot-wire anemometers. Project Report submitted to National Institute for Occupational Safety and Health Council of Labor Affairs, June 1993, Taipei, Taiwan. (in Chinese)
64. Huang, R. F., Three dimensionally stretched unsteady structure in a combusting jet in cross-flow. Project Report submitted to National Science Council, NSC-81-0401-E011-572, February 1993, Taipei, Taiwan. (in Chinese)
65. Huang, R. F., Lift-off stability of round gas jet flames. Project Report submitted to National Science Council, NSC-78-0401-E008-13, August 1990, Taipei, Taiwan. (in Chinese)
66. Huang, R. F., The structure and stability of nonpremixed gas jet flames. Ph.D. dissertation, The University of Oklahoma, Norman, OK, U.S.A., 1987.
67. Huang, R. F., The simulation of a single-cylinder, two-stroke Diesel engine. Interior Report submitted to MIRL, ITRI, Hsing Chu, Taiwan, 1982. (in Chinese)
68. Huang, R. F., The absorptive refrigeration system with application of solar energy. M.S. thesis, National Tsing Hua University, Hsing Chu, Taiwan, 1980. (in Chinese)

＊如有異動，請以老師個人網站資料為準。

＊老師本人如欲自行維護本頁面，請洽技轉中心索取帳號密碼。