教授課程

切削學、製造學、電腦整合製造概論、機械製造系統工程

 期刊論文

1.Lin, Z. C., F. S. Chang, and Y. T. Lin, 1987, "The Effect of Tool Flank Wear on the
Temperature Distribution of A Machined Workpiece," Journal of the Chinese Institute ofEngineers, series A, Vol.10, No.4, pp.353-362. (NSC 75-0401-E011 -01) (EI)
2.Lin, Z. C. and C. Y. Ho, 1987, "An Analysis of Elastic Impact Problems on Simply
Supported Beams and Plates," Journal of The Chinese Society of Mechanical Engineers,Vol.8, No.4, pp231-237. (EI)
3.Lin, Z. C. and S. P. Lo, 1988, "Effect of Cooling Water Velocity and Lubricant Film on the Temperature Distribution of the Hot Forging Backward Extrusion," The Chinese Journal of Mechanics, Vol.4, No.1, pp.37-45.
4.Lin, Z. C., S. J. Huang and W. J. Wu, 1988, "A Study of Linearizing Dynamics Equation for A Five-Degrees-of-Freedom Robot With A Parallel Drive Mechanism," Journal of the Chinese Society of Mechanical Engineers, Vol.9, No.5, pp. 371-382. (EI)
5.Lin, Z. C., J. F. Shieh and Y. N. Chen, 1988, "A Dynamic Optimization Design of the Electro-Hydraulic Servovalve," Jo-urnal of the Chinese Society of Mechanical
Engineers, Vol.9, No.6, pp.421-423. (EI)
6.Lin, Z. C., C. L. Hsu and K. H. Yao, 1989, "Projectning and Building and Integrated Design Software of Blanking and Piercing Dies (ESSCP) with A Micro Expert System as A Main Structure," Journal of the Chinese Society of Mechanical, Vol.10, No.2, pp.101-120.
7.Lin, Z. C., W. F. Hwang and Y. T. Lin, 1989, "The Micro Expert System of NC Lathe's Cutting Parameters and Tool Selection," Journal of the Chinese Society of Mechanical Engineers, Vol.10, No.2, pp.121-133. (NSC 77-0401-E011-02) (EI)
8.Lin, Z. C. and C. J. Lee, 1989, "A Coupled Analysis of the Thermo-Elastic- Plastic Large Deformation for Upsetting Process," Journal of the Chinese Society of Mechanical Engineers, Vol.10, No.3, pp.197-209. (EI)
9.Lin, Z. C. and S. Y. Lin, 1990, "An Investigation of A Coupled Analysis of A Thermo-Elastic-Plastic Model During Warm Upsetting," International Journal of Machine Tools & Manufacture, Vol.30, No.4, pp.599-612. (NSC79-0401-E011 -04)
(SCI, EI)
10. Lin, Z. C., Y. Y. Lin and C. R. Liu,1991, "Effect of Thermal Load and Mechanical Load on the Residual Stress of the Machined Workpiece," Int. J. Mech. Sci. Vol.33, No.4, pp.263-278. (SCI)
11. Lin, Z. C. and C. Y. Ho, 1991, "An Investigation of Elastic Impact Problems on Beams and Plates," Journal of Sound and Vibration, Vol.148, No.2, pp.293-306. (SCI)
12. Lin, Z. C., S. Shar, F. H. Chang and T. J. Chen, 1991, "Investigation of Temperature Distribution, Thermal Deformation and Thermal Stress on the Work Roll in Hot Rolling," Journal of the Chinese Society of Mechanical Engineers, Vol.12, No.5, pp.489-501. (EI)
13. Lin, Z. C. and S. Y. Lin, 1992, "Using a Thermo-Elastic-Plastic Coupling Model to Investigate the Effect of Rake Angle on the Physics of Metal Cutting," Journal of the Chinese Society of Mechanical Engineers, Vol.13, No.6, pp.568-580. (EI)
14. Lin, Z. C. 1992, "A Study of Sheet Bending Expert System," Metal Industries, Vol.26, No.6, pp.156-163.
15. Lin, Z. C. and S. Y. Lin, 1992, "A Coupled Finite Element Model of
Thermo-Elastic-Plastic Large Deformation Orthogonal Cutting," ASME, Journal of the Engineering Materials and Technology, Vol.114, No.2, pp.218-226. (NSC
80-0401-E011-06) (SCI, EI)
16. Lin, Z. C. and C. H. Huang, 1993, "An Investigation of an Expert System Employing Chinese for Deep-drawing of a Press Die Design," Journal of the Chinese Society of Mechanical Engineers, Vol.14, No.1, pp.63-77. (NSC 77-0401-E011-06) (EI)
17. Lin, Z. C. and S. Y. Lin, 1993, "An Investigation of Ductile Fracturing in Mild Steel During Upsetting," International Journal of Machine Tools & Manufacture, Vol.33, No.1, pp.31-50. (SCI, EI)
18. Lin, Z. C. and W. C. Pan, 1993, "A coupled Thermo-Elastic-Plastic Model with A Modified Direct Iteration Method in Cold Extrusion Process," Journal of Strain Analysis, Institution of Mechanical Engineers, I. Mech. E. U. K., Vol.28, No.2, pp.89-100. (NSC 81-0401-E011-554) (SCI, EI)
19. Lin, Z. C., Y. Y. Lin and C. R. Liu, 1993, "The Influence of the Degree of Constraint on the Residual Stress of the Machined Workpiece," Computer Methods in Applied Mechanics and Engineering, Vol.108, pp.37-52. (SCI, EI)
20. Lin, Z. C. and W. C. Pan, 1993, "A Thermo-Elastic-Plastic Large Deformation Model for Orthogonal Cutting with Tool Flank Wear Part I: Computational Procedures," International Journal of Mechanical Sciences, Vol.35, No.10, pp.829-840. (NSC 82-0422-E011-015) (SCI)
21. Lin, Z. C. and W. C. Pan, 1993, "A Thermo-Elastic-Plastic Large Deformation Model for Orthogonal Cutting with Tool Flank Wear Part II: Machining Application," International Journal of Mechanical Sciences, Vol.35, No.10, pp.841-850. (NSC 82-0422-E011-015) (SCI)
22. Lin, Z. C., K. T. Chu, and W. C. Pan, 1994, "A Study of the Stress, Strain and Temperature Distributions of A Machined Workpiece Using a Thermo-Elastic-Plastic Coupled Model," Journal of Materials Processing Technology, Vol.41, No.3, pp.291-310. (SCI, EI)
23. Lin, Z. C. and G. J. Peing, 1994, "An Investigation of an Expert System for Sheet Metal Bending Design," Journal of Materials Processing Technology, Vol.43, pp.165-176. (SCI, EI)
24. Lin, Z. C. and H. Chang, 1994, "An Investigation of Expert System for Die Design," Journal of Intelligent Manufacturing, Vol.5, No.3, pp.177-192. (SCI, EI)
25. Lin, Z. C. and C. J. Huang, 1994, "An Analysis of Symmetric Rolling of Aluminum Strip Using a Three-Dimensional Elastic-Plastic Large Deformation Finite Element Method," Journal of Strain Analysis, I. Mech. E., England, Vol.29, No.4, pp.267-276. (NSC 83-0401-E011-153) (SCI, EI)
26. Lin, Z. C. and W. C. Pan, 1994, "A Thermo-Elastic-Plastic Model with Special Elements in Cutting Process with Tool Flank Wear," International Journal of Machine
Tools & Manufacture, Vol.34, No.6, pp.757-770. (NSC 82-0422-E011-015) (SCI, EI)
27. Lin, Z. C. and D. T. Lin, 1994, "Dynamic Deflection Analysis of A Projectar Robot," Computer & Structure, Vol.53, No.4, pp.947-960. (SCI, EI)
28. Lin, Z. C. and Y. N. Cheng, 1994, " A Study of the Rolling Speed and the Strain Energy Density of Asymmetrical Rolling for Aluminum Strip," The Japan Society of
Mechanical Engineers, JSME, Mechanics and Material Engineering. Series A, Vol.37,
No.4, pp.502-513. (SCI, EI)
29. Lin, Z. C. and C. C. Chen, 1995, "Three-Dimensional Heat Transfer and Thermal
Expansion Analysis of Work Roll During Rolling," Journal of Materials Processing Technology, Vol.49, pp.125-147. (SCI, EI)
30. Lin, Z. C. and D. Y. Chen, 1995, "A Study of Cutting with a CBN Tool," Journal of Materials Processing Technology, Vol.49, pp.149-164. (SCI, EI)
31. Lin, Z. C. and B. Y. Lee, 1995, "An Investigation of Residual Stress of Machined Workpiece Considering Tool Flank Wear," Journal of Materials Processing Technology, Vol.51, No.1-4, pp.1-24. (SCI, EI)
32. Lin, Z. C. and V. H. Lin, 1995, "Analysis of Cold Rolling Characteristics Variation of Rolling Force, Strip Shape, Stress and Temperature for a Three-Dimensional Strip," Journal of Materials Processing Technology, Vol.54, No.1-4, pp.326-340. (NSC 83-0401-E011-153) (SCI, EI)
33. Lin, Z. C., W. C. Pan and S. P. Lo, 1995, "A Study for Orthogonal Cutting with Tool Flank Wear and Sticking Behavior on Tool-Chip Interface," Journal of Materials Processing Technology, Vol.52, No.2-4, pp.524-538. (SCI, EI)
34. Lin, Z. C. and T. J. Shieh, 1995, "Application of an Analytical Hierarchy Process Method and Fuzzy Compositional Evaluation in the Expert System of Sheet Bending Design," International Journal of Advanced Manufacturing Technology, Vol.10, pp.3-10. (EI)
35. Lin, Z. C. and S. C. Chen, 1995, "The Study of Design Data Extraction From Design Drawing with Application in Measurement," Int. J. of Advanced Manufacturing Technology, Vol.10, pp.99-109. (EI)
36. Lin, Z. C. and P. C. Tsai, 1995, "The Application of the Fuzzy Similar Matrix in the Design of Sheet Bending Expert System," Int. J. of Advanced Manufacturing Technology, Vol.10, pp.396-403. (EI)
37. Lin, Z. C. and C. B. Yang, 1995, "The Expert System of Fixturing Design for Face Milling Using Modular Fixture," International Journal of Advanced Manufacturing Technology, Vol.10, pp.379-388. (NSC 79-0401-E011-05) (EI)
38. Lin, Z. C. and C. B. Yang, 1995, "Economic Evaluation of the Projectning of a Flexible Manufacturing System," International Journal of Computer Applications in Technology, Vol.8, No.1/2, pp.21-29. (EI)
39. Lin, Z. C. and S. C. Chen, 1995, "A Heuristic method for deciding the Optimal Measuring Sequence", International Journal of Computer Applications in Technology, Vol.8, No.516, pp.333-343. (EI)
40. Lin, Z. C. and T. J. Shieh, 1995, "An Study of the Application of Artificial Neural Networks in the Expert System of Sheet Bending Design," CSME, Journal of Chinese Society of Mechanical Engineers, Vol.16, No.3, pp.283-291. (EI)
41. Lin, Z. C. and C. C. Liu, 1995, "A Finished Machining Simulation with a Pseudo-Friction Coefficient," CSME, Journal of Chinese Society of Mechanical Engineers, Vol.16, No.3, pp.257-268. (EI)
42. Lin, Z. C. and W. S. Yang, 1995, "Rolling Process Analysis of Aluminum Strip by a Coupled Thermo-Elastic-Plastic Model," Int. J. Machine Tools and Manufacture, Vol.35, No.4, pp.619-635. (SCI, EI)
43. Lin, Z. C. and S. C. Chen, 1995, "Project Measuring Sequence with Dynamic Programming," International Journal of Computer Integrated Manufacturing, Vol.8, No.4, pp.237-246. (NSC 81-0422-E011-06) (SCI)
44. Lin, Z. C. and C. S. Shen, 1995, "An Investigation of an Expert System for Hydraulic Circuit Design with Learning, "Artificial Intelligence in Engineering, Vol.9, pp.153-165. (EI)
45. Lin, Z. C. and Y. C. Cheng, 1995, "An Investigation of the Effect of Speeds of Work Rolls on Rolling Strip," ASME Transaction, Journal of Engineering Materials
and Technology, Vol.117, No.3, pp.341-346. (SCI, EI)
46. Lin, Z. C. and C. Y. Hsu, 1996, "An Investigation of the Expert System for Shearing Cut Progressive Die Design," International Journal of Advanced Manufacturing Technology, Vol.11, No.1, pp.1-11. (EI)
47. Lin, Z. C. and D. Y. Chen, 1996, "The Selection System for Sheet Bending Tooling," International Journal of Advanced Manufacturing Technology, Vol.11, No.2, pp.127-135. (EI)
48. Lin, Z. C. and C. C. Liu, 1996, "Analysis of the Orthogonal Finish Machining Using Tungsten Carbide and Diamond Tools of Different Heat Transfer Coefficients," International Journal of Machine Tools & Manufacture, Vol.36, No.1, pp.73-88. (SCI,
EI)
49. Lin, Z. C. and D. Y. Chang, 1996, "The Application of Neural Network Machine
Learning Model in the Selection System of Sheet Metal Tooling," Artificial Intelligence in Engineering, Vol.10, pp.21-37. (EI)
50. Lin, Z. C. and C. B. Yang, 1996, "Evaluation of Machine Selection by the AHP Method," Journal of Materials Processing Technology, Vol.57, pp.253-258. (SCI, EI)
51. Lin, Z. C. and H. Chang, 1996, "Application of Fuzzy Set Theory and Back-Propagation Neural Networks in Progressive Die Design," SME (Society ofm Manufacturing Engineer), Journal of Manufacturing Systems, Vol.15, No.4, pp.268-281. (SCI)
52. Lin, Z. C. and C. C. Shen, 1996, "A Three-dimensional Finite Element Method for Non-isothermal Aluminum Flat strip Rolling Process", ASM (American Society of Material), Journal of Material Engineering and Performance, Vol.5, No.4, pp.452-461. (SCI, EI)
53. Lin, Z. C. and D. Y. Chang, 1996, "Selection of Sheet Metal Bending Machines by the PRISM-Inductive Learning Method", Journal of Intelligent Manufacturing, Vol.7, pp. 341-349. (SCI, EI)
54. Lin, Z. C. and Y. C. Chang, 1996, "Open Structure Design for Sash sheet Metal Product ", International Journal of Materials and Product Technology, Vol.11, No. 1/2,
pp.19-50. (EI)
55. Lin, Z. C. and J. T. Horng, 1996, "Geometric Data of the Object-Oriented Program Method and Development Rule for Thin Sheet Metal Product", CSME, Journal of Chinese Society of Mechanical Engineers, Vol.17, No.3, pp. 231-239. (EI)
56. Lin, Z. C. and C. C. Shen, 1996, "Three Dimensional Rolling Process Analysis with a Coupled Finite Element", CSME, Journal of Chinese Society of Mechanical Engineers, Vol.17, No.4, pp.309-321. (NSC84-2212-E-011-007) (EI)
57. Lin, Z. C. and C. C. Shen, 1996, "Three-dimensional Asymmetrical Rolling of an Aluminum Flat Strip Using an Elastic-plastic Finite Element Method," International, Journal of Computer Applications in Technology, Vol.9, No.5/6, pp. 281-297. (EI)
58. Lin, Z. C. and Y. D. Yarng, 1996, "A Study of Three-dimensional Cutting Model," International Journal of Computer Applications in Technology, Vol.9, No.5/6, pp. 330-343. (EI)
59. Lin, Z. C. and C. S. Deng, 1996, "Optimizing the Number and Position of The Measuring Points on a Projecte Curve Using an Algorithm for Comparing the Angle Between the Normal Directions," International Journal of Advanced Manufacturing Technology, Vol.12, pp.103-110. (EI)
60. Lin, Z. C, W. L. Lai, H. Y. Liu and C. R. Liu, 1997, "Residual Stresses with Different Tool Flank Wear Lengths in the Ultra-precision Machining of NiP Alloy", Journal of Materials Processing Technology, 65, pp.116-126. (SCI, EI)
61. Lin, Z. C. and S. P. Lo, 1997, "Ultra-precision orthogonal cutting simulation for oxygen free high conductivity copper", Journal of Material Processing Technology, 65, pp.281-291. (SCI, EI)
62. Lin, Z. C. and Q. Y. Liu, 1997, "Selection of Coordinate Measuring Machine by Neural Network Method," Int. J. of Advanced Manufacturing Technology, 13, pp.42-55. (NSC 84-2212-E-011-018) (NSC85-2212-E-011-022) (SCI, EI)
63. Lin, Z. C. and R. C. Hwang, 1997, "The Application of the Simulated Annealing Method and Heuristic Algorithms in the Selection of Fixture Elements," Int. J. of Advanced Manufacturing Technology, 13, pp.191-205. (SCI, EI)
64. Lin, Z. C. and C. C. Chen, 1997, "Measuring Sequence Projectning by the Nearest Neighbor Method and the Refinement Method," International Journal of Advanced Manufacturing Technology, 13, pp.271-281. (SCI, EI)
65. Lin, Z. C. and Y. C. Chang, 1997, "Sash Sheet Metal Development and the Application of a Back-propagation Neural Network in the Calculation of Developed Length", Journal of Materials Processing Technology, 69, pp.95-105. (SCI, EI)
66. Lin, Z. C. and C. C. Shen, 1997, "A Rolling Process Two Dimensional Finite Element Model Analysis", Finite Elements in Analysis and Design. 26, pp.143-160. (NSC84-2212-E-011-007) (EI)
67. Lin, Z. C. and Y. D. Yarng, 1997, "Three Dimensional Cutting Process Analysis with Different Cutting Velocities", Journal of Materials Processing Technology, 70, pp.22-33. (SCI, EI)
68. Lin, Z. C. and S. P. Lo, 1997," The Study of Tool-Chip Interface Contact Problem Under Low Cutting Velocity with Elastic Cutting Tool", Journal of Materials Processing Technology, 70, pp34-46. (SCI, EI)
69. Lin, Z. C. and S. Y. Lee, 1997, "The Effect of Slightly Concave-Shape Roller on Strip During Rolling", Journal of Materials Processing Technology, 70, pp.47-61. (SCI, EI)
70. Lin, Z. C. and V. H. Lin, 1997, "A Study of Radial Thermal Expansion of a Work Roll for Three-Dimensional Strip Deformation During Rolling", Journal of Materials Processing Technology, 70, pp.62-76. (SCI, EI)
71. Lin, Z. C. and C. C. Chen, 1997, "Study of The Automatic Projectning of Measuring Points with Basic Elements Features", International Journal of Production Research, Vol.35, No.11, pp.3157-3178. (SCI)
72. Lin, Z. C. and J. C. Hwang, 1997, "The Application of Neural Networks in The Fixture Projectning of Pattern Classification", Journal of Intelligent Manufacturing, Vol.8, No.4, pp.307-322.（SCI, EI）
73. Lin, Z. C. and S. Y. Lee, 1997, "An Investigation of Contact Problem between
Strip and Work Roll with a Smooth Straight Surface During Cold Rolling", International Journal of Mechanical Sciences, Vol.39, No.12, pp.1385-1404. (SCI)
74. Lin, Z. C. and S. Y. Lee, 1997, "Application of an Elastic Roller with Slightly Convex Shape to the Improvement of the Flatness of a Strip for Cold Rolling", JSME International Journal Series A, Vol.40, No.4, pp.459-471. (SCI, EI)
75. Lin, Z. C. and R. C. Hwang, 1997, “The Application of the Simulated Annealing Method and Heuristic Algorithms in the Selection of Fixture Elements,” Int. J. of Advanced Manufacturing Technology, 13, pp.191-205.
76. Lin, Z. C. and Y. C. Chang, 1998, "Determination of Sash Bending Procedures and Selection of Bending Tools", International Journal of Computer Integrated Manufacturing, Vol.11, No.3, pp.241-254. (SCI)
77. Lin, Z. C. and, S. P. Lo, 1998, "A Study of Deformation of the Machined Workpiece and Tool under Difference Low Cutting Velocities with an Elastic Cutting Tool", International Journal of Mechanical Sciences, Vol.40, No.7, pp.663-681. (SCI)
78. Lin, Z. C. and W. J. Wu, 1998, "Analysis of Overlay Accuracy Error Parameters"Proceedings of the National Science Council, ROC., Part A: Physical Science and Engineering, Vol.22,No.2,pp.261-271.(NSC85-2221-E -011-008) (EI)
79. Lin, Z. C. and W. J. Wu, 1998, "A Study of Improving Overlay Accuracy In IC Manufacture", International Journal of Advanced Manufacturing Technology, Vol.14, pp.835-847. (SCI, EI)
80. Lin, Z. C. and J. T. Horng, 1998, "Sheet Metal Products: Database in Support of their Process Projectning and Surface Development", International Journal of Computer Integrated Manufacturing, Vol.11, No.6, pp.524-533. (SCI)
81. Lin, Z. C. and Y. L. Zeng, 1998, "Study on the Thermo-Elastic-Plastic Cutting Model for Three Dimensional Tool with Chip Breaker Tools", ASME, Journal of Engineering Materials and Technology, Vol.120, pp.265-274. (SCI, EI)
82. Lin, Z. C. and D. C. Chang, 1998, "Framework of the Information Exchange between the Shop Fool Control System and the Management Information System in an Integrated Circuit Packaging System", CSME, Journal of Chinese Society of
Mechanical Engineers, Vol.19, No.6, pp.561-572. (EI)
83. Lin, Z. C. and Y. Y. Lin, 1999, "A Study of Oblique Cutting Model", Journal of Materials Processing Technology, 86, pp.119-130. (SCI, EI)
84. Lin, Z. C. and W. J. Wu, 1999, "Multiple Linear Regression Analysis of the Overlay Accuracy Model", IEEE Transaction on Semiconductor Manufacturing, Vol.12, No.2, pp.229-237. (SCI)
85. Lin, Z. C., J. M. Chang and W. C. Lu, 1999, "Application of Petri-Net in the Projecting of Shearing-Cut Progressive Die’s Workstation", CSME, Journal of Chinese Society of Mechanical Engineering, Vol.20, No.2, pp.139-146. (EI)
86. Lin, Z. C. and Y. Y. Lin, 1999 , "Fundamental Modeling for Oblique Cutting by Thermo-elastic-plastic FEM", International Journal of Mechanical Sciences, Vol.41, No.8, pp.941-965. (SCI)
87. Lin, Z. C., W. L. Lai, H. Y. Lin and C. R. Liu, 1999, "An Investigation of the Chip Separation Criterion with Different Physical Properties and Different Cutting Parameters for the Ultra-precision Machining of NiP Alloy", International Journal of Material and Product Technology, Vol.14, No.1, pp.28-49. (EI)
88. Lin, Z. C. and C. T. Lin, 2000, "IDEFO Model of the Measurement Projectning for a Workpiece Machined by a Machining Center", International Journal of Advanced Manufacturing Technology, Vol. 16, No. 6, pp.656-667. (SCI, EI)
89. Lin, Z. C. and C. L. Fung, 2000, "A Hot Rolling Analysis with Considering of the Contact Deformation between Strip and Roll", CSME, Journal of the Chinese Society of Mechanical Engineer, Vol. 21, No. 5, pp.459-472. (EI)
90. Lin, Z. C. and T. G. Huang, 2000, "Hot Rolling of an Aluminum-Copper Sandwich Flat Strip with Three-dimensional Finite Element Method", Journal of Materials Processing Technology, Vol.99, pp.154-168. (SCI, EI)
91. Lin, Z. C., W. L. Lai, H. Y. Lin and C. R. Liu, 2000, "The Study of Ultra-Precision Machining and Residual Stress for NiP Alloy with Different Cutting Speeds and Depths of Cut", Journal of Material Processing Technology, Vol.97, pp.200-210. (SCI, EI)
92. Lin, Z. C. and Q. Y. Liu, 2000, "Algorithm of the Normal Direction Error Analysis of Surface Mesh Grids for Searching Measuring Points", International Journal of Computer Integrated Manufacturing, Vol.13, No.4, pp.335-344. (SCI)
93. Lin, Z. C. and T. G. Huang, 2000, "Different Reduction Rates and Sliding Phenomenon Study for three-dimensional Hot Rolling with Sandwich Flat Strip", International Journal of Mechanical Sciences, 42,pp.1983-2012. (SCI)
94. Lin, Z. C. and J. T. Horng, 2000, "Feature-Based Sheet Metal Design and Development System", International Journal of Materials and Product Technology, Vol.15, No.6, pp.471-494. (SCI, EI)
95. Lin, Z. C. and J. C. Hwang, 2000, "The Fixture Projectning of Modular Fixtures for Measurement", IIE Transaction on Design and Manufacturing, Vol.32, pp.345-359. (SCI)
96. Lin, Z. C. and J. J. Chow, 2000, "Application of the Grey System in the Projectning of the Measuring Points Under the Range of the Dimensional Tolerance of a Projecte Workpiece", International Journal of Computer Integrated Manufacturing, Vol.13, No.6, pp.555-566. (SCI)
97. Lin, Z. C. and Q. Y. Liu, 2000, " Knowledge Acquisition Model for Selecting Coordinate Measuring Machines using Inductive Learning", IIE Transactions on Design and Manufacturing, Vol.32, pp.573-583. (SCI)
98. Lin, Z. C. and Q. Y. Liu, 2000, " A Neural Network-Based Algorithm that Searches for the Measuring Points of a Rule Surface ", IIE Transactions on Design and Manufacturing, Vol.32, pp.333-343. (SCI)
99. Lin, Z. C. and Y. L. Zheng, 2000, "Three Dimensional Thermo-Elastic-Plastic Finite Element Analysis with Different Cutting Speeds", International Journal of Computer Application Technology, Vol.13, 3-5, pp.210-220. (SCI, EI)
100. Lin, Z. C. and J. J. Chow, 2001, "Integration Projectning Model of IDEFO and STEP Product Data Representation Methods in a CMM Measuring System", International Journal of Advanced Manufacturing Technology, Vol.17, pp.39-53. (SCI, EI)
101. Lin, Z. C. and S. P. Lo, 2001, "2-D Discontinuous Chip Cutting Model by Using Strain Energy Density Theory and Elastic-Plastic Finite Element Method", International Journal of Mechanical Science, Vol.43, pp.381-398. (SCI, EI)
102. Lin, Z. C. and W. S. Lin, 2001, "The Application of Grey Theory on the Prediction of Measuring Point for Circularity Geometric Tolerance", International Journal of Advanced Manufacturing Technology, Vol.17, pp.348-360. (SCI, EI)
103. Lin, Z. C. and C .C. Chen, 2001,"Collision-free Path Projectning for Coordinate
Measuring Machine Probe", International Journal of Production Research, Vol39, No.9, pp.1969-1992. (SCI)
104.Lin, Z. C. and J. J. Chow, 2001, "Near Optimal Measuring Sequence Projectning and Collision-Free Path Projectning with Dynamic Programming Method", International Journal of Advanced Manufacturing Technology, Vol.18, pp.29-43. (SCI, EI)
105. Lin, Z. C. and L. Y. Liu, 2001, "Application of the An Adaptive Neuro-Fuzzy
Interence System for the Optimal Analysis of Chemical Mechanical Polished Process", International Journal of Advanced Manufacturing Technology, Vol.18, pp.20-28.
(SCI, EI)
106. Lin, Z. C. and Y. Y. Lin, 2001, "Three-Dimensional Elastic-Plastic Finite Element Analysis for Orthogonal Cutting with Discontinuous Chip of 6-4 Brass”, Theoretical and Applied Fracture Mechanics, Vol.35, pp.137-153. (SCI, EI)
107. Lin, Z. C. and C. C. Shen, 2001, "A Coupled Finite Element Method for a Three Dimensional Analysis of the Flat Rolling of Aluminum with Different Reduction", Journal of Material Processing Technology, Vol.110, pp.10-18. (SCI, EI)
108. Lin, Z. C. and J. M. Chang, 2001, "Application of Torque Equilibrium Method in the Study of Offset Displacement in the Upper and Lower Dies in Shearing-Cut Progressive Die", International Journal of Materials and Product Technology, vol.16, Nos.6/7,pp.528-544. (SCI, EI)
109. Lin, Z. C. and C. L. Fang, 2001, "Study on Contact Model for Cold Rolling under the Consideration of Heat Transfer", has been accepted by Journal of Materials Processing Technology. (SCI, EI)
110. Lin, Z. C. and C. H. Deng, 2001, "Application of Petri Net in the Projectning of Shearing-Cut and Bending Progressive Die Works Stations", International Journal of Materials and Product Technology, Vol.16, Nos.6/7, pp.579-591. (SCI, EI) 111. Lin, Z. C. and C. S. Deng, 2001, "The Study of Measuring Points on a Projecte Curve by the Method of Gradually Adding Training Care and Concept of Pattern Assembly with Fuzzy Point", International Journal of Materials and Product Technology, Vol.16, Nos.6/7,pp.605-625. (SCI, EI)
112. Lin, Z. C. and W. S. Lin, 2001, "Measurement Point Prediction of Flatness Geometric Tolerance by Using Grey Theory", Precision Engineering Journal of the International Societies for Precision Engineering and Nanotechnology, American Society for Precision Engineering, Vol.25, pp.171-184. (SCI, EI)
113. Lin, Z. C. and C. H. Deng, 2001, "Analysis of Torque Equilibrium Model and the Optimal Strips Working Sequence for Shearing-Cut and Bending Progressive Die", Journal of Materials Processing Technology, Vol.115, pp.302-312.（SCI, EI）
114. Lin, Z. C. and Y. Y. Lin, 2001, “Elastic-Plastic Finite Element Analysis for Oblique Cutting with Discontinuous Chip of 6-4 Brass”, IMechE, The Journal of Strain Analysis for Engineering Design, Vol.36, No.6, pp.579-594. (SCI, EI)
115. Lin, Z. C. and Y. Y. Lin, 2001, “An Analysis of Chip Breaker Tool Effect on an Oblique Cutting Process Using a Coupled Thermo-Elastic-Plastic FEM”, Int. J. of Materials and Product Technology, vol.16, No.8, pp. 669-693.(SCI)
116. Lin, Z. C. and Y. Y. Lin, 2001, "A Study of Oblique Cutting for Different Low Cutting Speeds", Journal of Material Processing Technology, Vol.115, pp.313-325. (SCI, EI)
117. Lin, Z. C. and Q. Y. Liu, 2001, "Using the Concept of Probability Function and Decision Tree to Select Coordinate Measuring Machines", has been accepted by Artificial Intelligence in Engineering. (EI)
118. Lin, Z. C. and W. J. Wu, 2001, “Study of temperature distribution in Wafer exposure process”, Heat and Mass Transfer, Vol.38, pp.639-648. (SCI)
119. Lin, Z. C. and D. C Chen, 2002, "Static Information Model of the Cell Controller Layer for Integrated Circuit Packaging with the Unified Modeling Language", International Journal of Computer Integrated Manufacturing, Vol.15, No.1, pp.69-85. (SCI)
120. Lin, Z. C. and W. J. Wu, 2002, “3-D finite Element simulation of Wafer Thermal Distortion and Stress Fields in Exposure Process”, Internation Journal of Heat and Mass Transfer. Vol. 45,pp. 619-630. (SCI)
121. Lin, Z. C. and D. Y. Chang, 2002, “ A Cost-tolerance Analysis Model Based on Neural a Networks Method “, International Journal of Production Research. Vol. 40, No. 6, pp.1429-1452. (SCI)
122. Lin, Z. C. and C. Z. Lin, 2002, “IDEFO Measurement Projectning Model for a Workpiece Machined by a CNC Lathe”, Int. J. of Computer Applications in Technology, Vol.15, No.5, pp.79-91. (SCI)
123. Lin Z. C. and M. H. Chou, 2002, “Design of the Cooling Channels in Non-rectangular Plastic Flat Injection Mold”, Journal of Manufacturing system, Vol.21, No.3, pp.167-186. (SCI)
124. Lin, Z. C. and C. C. Chen, 2002, “Analysis of IC Dam-bar Trimming and Experimental Verification”, Journal of the Chinese Society of Mechanical Engineers, CSME, Vol.23, No.6, pp.497-506. (EI)（本篇論文獲得中國機械工程學會92年度「年會論文獎」）
125. Lin, Z. C. and D. Y. Chang, 2002, “Tool Wear Investigation on Precision Progressive Die for IC Dam-bar Cutting Process”, has been accepted by Int. J. of Advanced Manufacturing Technology. (SCI)
126. Lin, Z. C. and C. Y. Liu, 2003, “Analysis and Application of the adaptive neuro-fuzzy inference system in prediction of CMP machining parameters”, International Journal of Computer Application in Technology, Vol. 17, No. 2, pp. 80-89. (SCI)
127. Lin, Z. C. and C. C. Chen, 2003, “The Application of the Moment Equilibrium Model to the Offset of Pressure Center of Trimming Progressive Die in
IC Packaging Machine”,Journal of the Materials Processing Technology,Vol.140, pp.653-661. (SCI)
128. Lin, Z. C. and C. C. Chen, 2003, “Temperature Field Analysis of IC Molding Process Based on Three Dimensional Finite Element Analysis ”, has been accepted by Heat and Mass Transfer. (SCI)
129. Lin, Z. C. and D. Y. Chang, 2003, “ANew Tool Wear Examination Model by Least Square Method of Shearing Process of Thin Metal Sheet”,has been accepted by ASME, Journal of Manufacturing Science and Engineering, Technical Brief. (SCI)
130. Lin, Z. C. and V. H. Lin, 2003, “Friction Coefficient Investigation for Upsetting with a Procedure of Combining Inverse Model and the Proposed Regularization of Tikhonov Method ”,will be accepted by Computer Methods in Applied Mechanics and Engineering.
131. Zone-Ching Lin and Jen-Ching Huang, 2004,”A nano-orthogonal cutting model based on a modified molecular dynamics technique”, Nanotechnology , 15 , 510-519.
132. Lin, Z. C. and Ching-Been Yang , 2004,“The Near-Field Power Density Distribution Characteristics for Different Type Optical Fiber Probe”. The International Journal of Advanced Manufacturing Technology, accepted. (SCI)
133. Lin, Z. C. and J. C. Huang, November 2004,”A study on a rigid body boundary layer interface force model for stress calculation and stress–strain behaviour of nanoscale uniaxial tension”, Nanotechnology 15, accepted , No 11,1509-1518. (SCI)

研討會論文

1. 林榮慶,何智遠, 1986,「樑與板之衝擊問題分析」,中國機械工程學會第三屆學術研討會論文集,中壢市,第630-642頁。
2. 林榮慶、羅仕鵬,原壽恩, 1986,「冷卻水流速及熱阻薄膜熱鍛後擠沖頭溫度之影響」,中華民國力學學會第十屆全國力學會議論文集高雄市,第155-162頁。
3. 林榮慶、黃維富、林陽泰, 1987,「專家系統應用於CNC車床之研究」,第一屆全國自動化科技研討會論文集,南投縣溪頭,第301-310頁。(NSC 75-0611-E011-02)
4. 林榮慶、許覺良、姚高雄, 1987,「剪斷沖模設計專家系統研究」,第一屆全國自動化科技研討會論文集,南投縣溪頭,第321-331頁。
5. Lin. Z. C., Y. Y. Lin and C. R. Liu, 1987, "A Model of Residual Stress in the Machined Workpiece," Proceedings of the Twentieth Midwestern Mechanics Conference, Purdue University, U.S.A., Vol.14 (C), pp.1295-1300.
6. 林榮慶、謝志芳、陳義男, 1987,「電液伺服閥之動態最佳設計」,中國機械工程學會第四屆學術研討會論文集,新竹市,第1441-1449頁。
7. 林榮慶、羅仕鵬, 1987,「熱鍛後擠溫度模式及參數影響之分析」,中國機械工程學會第四屆學術研討會論文集,新竹市,第1217-1226頁。
8. 林榮慶、張福祥, 1987,「固定刀腹磨耗量下冷卻液對切削溫度分佈的影響」,中國機械工程學會第四屆學術研討會論文集,新竹市,第1165-1173頁。(NSC 75-0401-E011-01)
9. 林榮慶、李承政, 1987,「異質元素之熱彈塑大變形偶合分析」,中華民國力學學會第十一屆全國力學會議論文集,中壢市,第899-908頁。
10.林榮慶、何智遠, 1987,「樑及固定和簡支圓板之彈性衝擊分析」,中華民國力學學會第十一屆全國力學會議論文集,中壢市,第969-976頁。
11.林榮慶、王鎰興, 1987,「後向擠製加強環和模具間緊密配合之有限元素應力力分析」,中華民國力學學會第十一屆全國力學會議論文集,中壢市,第889-898頁。
12.林榮慶、黃緒哲、吳文章、林本勝, 1988,「Ｕ型機器人連桿對運動路徑之靈敏度分析」,第二屆全國自動化科技研討會論文集,墾丁,第196-205頁。
13.林榮慶、黃維富、林陽泰, 1988,「NC車床切削參數及刀具選擇小型專家分析」,第二屆全國自動化科技研討會論文集,墾丁,第506-516頁。(NSC 77-0401-E011-02)
14.林榮慶、許覺良、姚高雄, 1988,「以小型專家系統為主體之整合型剪斷沖模設計軟體(ESSCP-II)規劃及建立」,第二屆全國自動化科技研討會論文集,墾丁,第
493-505頁。
15.林榮慶、黃緒哲、吳文章, 1988,「具平行機構5自由度機器人動態方程式線性化研究」,中國機械工程學會第五屆學術研討會論文集,台北市,第825-835頁。
16.林榮慶、夏紹毅、張福祥、陳天榮, 1988,「高溫軋延下工輥之熱變形及熱應力之研究」,中國機械工程學會第五屆學術研討會論文集,台北市,第1017-1030頁。
17.林榮慶、黃啟輝, 1988,「引伸沖模模具設計中文專家系統之研究」,中國機械工程學會第五屆學術研討會論文集,台北市,第793-806頁。(NSC 77-0401-E011-06)
18.林榮慶、申冀治, 1988,「油壓迴路設計之專家系統知識表示研究」,中國機械工程學會第五屆學術研討會論文集,台北市,第781-791頁。
19.林榮慶、夏紹毅, 1988,「非均勻變形下軋延力及軋延板材之應力分析」,中華民國力學學會第十二屆全國力學會議論文集,台北市,第433-441頁。
20.林榮慶、申冀治, 1989,「具學習能力之油壓迴路設計專家系統之研究」,第三屆全國自動化科技研討會論文集,高雄市，第363-376頁。
21.林榮慶、許春耀, 1989,「剪斷連續沖模模具設計專家系統之研究」,第三屆全國自動化科技研討會論文集,高雄市,第363-376頁。
22.林榮慶、陳釘煙, 1989,「CBN刀具之切削實驗研究」,中國機械工程學會第六屆學術研討會論文集,台南市,第1273-1283頁。
23.林榮慶、林東村, 1989,「平面機械臂之動撓性分析」,中國機械工程學會第六屆學術研討會論文集,台南市,第1507-1522頁。
24. Lin, Z. C. and C. P. Yen, 1990, "Economic Evaluation of FMS by AHP Method", TheFirst International Conference on Automation Technology, Taipei, pp.33-34.
25.林榮慶、楊慶彬, 1990,「應用模組化夾具在面銑加工之夾具設計專家系統」, 中國機械工程學會第七屆學術研討會論文集,第1451-1458頁。(NSC79-0401-E011-05)
26.林榮慶、彭國正, 1990,「鈑金彎曲設計專家系統之研究」,中國機械工程學會第七屆學術研討會論文集,新竹市,第1445-1450頁。
27.林榮慶、張合, 1991,「模糊理論在連續沖模設計之應用」,第四屆全國自動化科技研討會論文集,台北市,第217-225頁。
28.林榮慶、蔡樸謙, 1991,「應用乏晰相似矩陣設計鈑金彎曲專家系統」,中國機械工程學會第八屆學術研討會論文集,台北市。
29.林榮慶、顏文熙、張福祥, 1991,「鋁板軋延之偶合熱彈塑性大變形有限元表分析法」,中國機械工程學會第八屆學術研討會論文集,台北市。
30.林榮慶、陳長城, 1992,「軋延工輥之三維熱傳與熱變形分析」,第九屆全國機械工程學術研討會論文集,高雄市,第31-38頁。
31.林榮慶、黃欽正, 1992,「鋁板材對稱軋之三維熱傳與熱變形分析」,第九屆全國機械工程學術研討會論文集,高雄市,第39-48頁。(NSC 83-0401-E011-153)
32.林榮慶、謝蒼仁, 1992,「電腦輔助板金彎曲設計」,CIMS-China'92,(第二屆中國計算機集成製造系統(CIMS)學術會議),深圳大學,大陸,第(04-15)-(04-23)頁。
33. Lin, Z. C. and C. C. Liu, 1993, "Using a Thermo-Elastic-Plastic Coupled Model to study a High Speed Machining," The Sixth International Manufacturing Conference with China, Hong Kong, pp.109-113.
34. Lin, Z. C. and S. C. Chen, 1993, "A study of Design Data Extract from Design Drawing", Beijing International Conference on Computer Integrated Manufacturing, Beijing, pp.312-317. (NSC 81-0422-E011-06)
35.林榮慶、鄧琴書, 1993,「電腦輔助曲線量測初步研究」,第六屆全國自動化科技研討會論文集,台中,第162-168頁。
36. Lin, Z. C. and C. C. Liu, 1993, "A Study of Orthogonal Cutting Considering Temperature and Strain Rate Effects", Sino German Joint Symposium on High Speed Manufacturing Technology, Taipei, Taiwan, pp.275-302.
37.林榮慶、張達元, 1993,「鈑金彎曲工具機選擇系統」,中國機械工程學會第十屆學術研討會論文集,新竹市,第575-583頁。
38.林榮慶、林文輝, 1993,「三維板材熱軋延之研究」,中國機械工程學會第十屆
學術研討會論文集,新竹市,第583-587頁。(NSC 83-0401-E011-153)
39. Chang, D. Y. and Z. C. Lin, 1994, "The application of the Neural Network Machine Learning Model in the Selection System of Sheet Metal Tooling," Proceedings of Automation '94, Taipei, Taiwan, R.O.C., Vol.3, pp.69-75.
40. Lin, Z. C., W. L. Lai, H. Y. Lin and C. R. Liu, 1994, "A Simulation of Super Precision Cutting Process of NiP Alloy," The First Asia-Pacific and Second Japan-China International Conference on Progress of Cutting and Grinding, Shanghai, China, pp.195-200.
41.林榮慶、洪振聰, 1994,「鈑金設計與展開資料庫研究」,中國機械工程學會第十一屆學術研討會論文集,臺中市,第87-94頁。
42.林榮慶、陳健忠, 1995, 「應用最鄰近點法則與細分法規劃量測順序」,中國機械工程學會第十二屆全國學術研討會,設計製造組論文等,嘉義縣,第721-729頁。
43. Lin, Z. C. and Y. C. Chang, 1996, "Development Length Study for Sheet Metal Product",The fourth International Conference on Automation Technology, Hsinchu, Taiwan, R. O. C.July, pp.457-463.
44.林榮慶、林琮智, 1996,「車床加工件之IDEF0量測規劃模式」,中國機械工程學會第十三屆全國學術研討會論文集(設計),台北市,第95-101頁。
45.林榮慶、鄭彥良, 1996,「三維正交切削之切屑幾何修正模式」,中華民國力學學會第二十屆全國力學會議論文集(二),台北市,第139-146 頁。
46.林榮慶、張正茂, 1997,「應用派屈網路於剪斷連續沖模加工站規劃之研究」,中國機械工程學會第十四屆全國學術研討會論文集(製造與生產),桃園縣中壢市,第167-174頁。
47. Lin, Z. C. and C. S. Deng, 1997, "Measuring Points Projectning on a Curve by Neural Network ", Proceedings of APSI’97 Asia-Pacific Symposium on Instrumentation,安徽省黃山市, R. O. C., pp.499-507
48. Lin, Z. C. and S. P. Lo, 1997, "Study of Initial Fracture Location of Chip for Machining of 6-4 Brass", ICPE’97, Proceeding of the International Conference on Precision Engineering, Taipei, Taiwan, R. O. C., pp.491-497.
49. Lin, Z. C. and Q. Y. Liu, 1998, "Searching the Measuring Points for a Rule Surface", ISMTII’98, Proceeding of the Fourth International Symposium on Measurement Technology and Intelligent Instruments, Sept.2-4, Miskolc-Liffafüred, Hungary, pp.433-440.
50.林榮慶、張志清, 1998,「三維熱彈塑型輥軋延分析」,中華民國力學學會第二十二屆全國力學會議論文集(二),台南市,第401-408頁。
51.林榮慶、林文盛, 1998,「灰色理論在真直度幾何公差上所需量測點數之預測」,中國機械工程學會第十五屆全國學術研討會論文集(控制與自動化),台南市,第395-402頁。
52.林榮慶、吳文章, 1999,「不同晶圓曝光間隔之溫度變化分析」,中國機械工程學會第16屆學術研討會論文集,新竹市,國立清華大學,第5冊,pp.631-637.
53.林榮慶、林有鎰, 1999,「不連續切屑之切削研究」,中華民國力學學會,第23屆全國力學會議論文集(三),新竹市,第94~101頁
54.林榮慶、林有鎰,2000,「斜交切削不連續切屑之斷裂模式」,第一屆海峽兩岸製造技術研討會論文集,台北市,台灣,第308~314頁.
55.林榮慶、陳俊甫,2000,「化學機械研磨晶圓承載器對晶圓表面應力分佈之影響」,中華民國力學學會,第24屆全國力學會議論文集,中壢市，ATM 24/Q9-16
56. Lin, Z. C. and C. H. Deng, 2000, "A Study of Spring Back Angle Prediction by Using Artificial Intelligent Method", The Sixth International Conference on Automation Technology. Proceedings vol.1, pp269-276.
57.林榮慶、歐榮年,2000,「網格圖法於平面量測路徑規劃及避障分析應用」,中國機械工程學會,第十七屆全國學術研討會論文集,高雄市,第349~356頁.
58.林榮慶、陳正?,2001,「鍛粗鉬金屬製程的摩擦係數的逆運算研究」, ,中國機械工程學會,第十八屆全國學術研討會論文集,台北市,第251~258頁.
59.林榮慶、張達元,2001,「應用田口法之IC導線架沖剪實驗」,第二屆海峽兩岸製造技術 研討會論文集,台北市,台灣,第354~363頁.
60. Lin, Z.C. and R.N. Owe, 2002,”Collision-free Rule Study of Measurement by Using Grid Diagram Method”, 2nd Internation Symposium on Instrumentation Science and Technology, Jinan,China, pp.45-49.
61.林榮慶、陳長成,2002,「IC引腳彎曲成形過程研究」,中國機械工程學會,第十九屆機械工程研討會論文集,雲林虎尾技術學院。
62.林榮慶、陳翰林,2002,「逆解段粗過程中空圓管之摩擦係數研究」,中華民國力學學會,中華民國第二十六屆全國力學會議,雲林虎尾技術學院。
63. Lin, Z. C. and J. C. Huang, 2003,”Study on the orthogonal cutting”,第三屆海峽兩岸製造科技研討會, pp.32-39.
64.林榮慶,梁景雲,2003,「知識網路創研機制製程專利產出研究」,國際製造工程學會(SME)中華民國分會,第三屆精密機械製造研討會,高雄市,國立中山大學, pp499-505.
65.林榮慶,張達元,2003,「結合田口法之IC 導線架橋帶剪切參數網路模型」,中國機械工程學會,第二十屆全國學術研討會論文集,台北市,國立台灣大學, pp1463-1470.
66.林榮慶,黃仁清,陳振達,2003,「銅材料奈米級拉伸模式研究」,中華民國力學學會,中華民國第二十七屆全國力學會議,台南市,國立成功大學.vol.3,pp954-961.
67.林榮慶,林豐志,楊慶彬,2004,「近場光學微影加工之參數分析」,第四屆海峽兩岸製造科技研討會論文集,pp95-108.
68.林榮慶,楊慶彬,2004,「近場光學微影點加工模擬模型之研究」,SME國際製造工程學會中華民國分會,九十三年度年會暨第四屆精密機械製造研討會,論文摘要集,台北市,國立台北科技大學,pp51
69. 林榮慶,黃欽正,2004,「迴轉式氣壓致動器運動之阻尼係數的逆解模式初步研究」,SME國際製造工程學會中華民國分會,九十三年度年會暨第四屆精密機械製造研討會,論文摘要集,台北市,國立台北科技大學,pp68
70.林榮慶,陳健忠,陳順榮,2004,「導入領域知識之專利分析方法研究」,中國機械工程學會,第二十一屆全國學術研討會論文集, 高雄市,國立中山大學, pp4925-4929.
71.林榮慶,陳健忠,陳順榮,2004,「工程代理人與CMP研磨墊領域工程知識之知識網路整合研究」,中國機械工程學會, 第二十一屆全國學術研討會論文集, 高雄市,國立中山大學,pp4931-4936.
72. Z. C. Lin and V. H. Lin,2004,「An Inverse Method for Calculating the Friction Coefficientbetween the Section Reduction Part of the Die and Billet during Extrusion Process」,陳朝光講座教授七十歲生日慶祝論文專輯, 高雄市,國立中山大學, pp178-189.

研究報告

1. 林榮慶、林陽泰, 1986,「刀腹磨耗對工件內部溫度的影響」,(NSC75-0401-E011-01).
2. 林榮慶、林陽泰, 1986,「彈體模具熱變形及熱應力分析」,聯勤鍛造中心研究報告。
3. 林榮慶, 1986,「策略性工業產品國家標準編擬草案-工具機自動補償工具標準」,中標局報告書。
4. 林陽泰、林榮慶, 1987,「CNC車床施工準備最佳化設計(第一年計畫)」,國科會研究報告,(NSC 75-0611-E011-02).
5. 戴宜傑、林榮慶, 1987,「連續沖CAD軟體發展一剪斷連續沖模」,金屬中心計畫報告。
6. 林榮慶, 1987,「切削工件內部應力受到刀具磨耗之影響分析」,國科會研究報告,(NSC76-0401-E011-04).
7. 林榮慶、黃緒哲, 1987,「Ｕ型機器人連桿對運動路徑之靈敏度分析與線性化研究」,工研院機械所計畫報告。
8. 林榮慶, 1987,「輥輪在高溫下冠高之研討」,中鋼公司研究計畫報告。
9. 林榮慶, 1988,「切削工件殘餘應力研究」,國科會研究報告,(NSC
76-0401-E011-07).
10.林陽泰、林榮慶, 1988,「專家系統應用於基本油壓迴路設計及其元件選擇」,金屬中心計畫報告。
11.戴宜傑、林榮慶, 1988,「圓筒形引伸連續沖模CAD軟體發展－第一期」,金屬中心計畫報告。
12.林榮慶, 1988,「切削工件之熱彈塑大變形有限元素應力分析一在刀腹有磨耗之切削情況」,國科會研究報告,(NSC 77-0401-E011-01).
13.林陽泰、林榮慶, 1988,「CNC車床施工準備最佳化設計(第二年計畫)」,國科會研究報告,(NSC 77-0401-E011-02).
14.戴宜傑、林榮慶, 1988,「圓筒形引伸連續沖模CAD軟體發展一第二期」,金屬中心計畫報告。
15.李得璋、林榮慶、吳傳嘉, 1989,「捷運工程資源編碼之規劃研究」,台北市捷運局研究計畫報告。
16.林榮慶, 1989,「專家系統應用於引伸沖模具設計之研究」,國科會研究報告,(NSC77-0401-E011-06).
17.林榮慶, 1990,「鋁熱軋板材之熱應力一應變研究」,中國鋼鐵公司建教計畫報
告,(TRC-79-03).
18.林榮慶, 1990,「溫間鍛粗之熱彈塑大變形偶合分析及應變率之研究」,國科會研究報告,(NSC 79-0401-E011-04).
19.林榮慶, 1990,「應用組合式夾具在面銑加工之夾具設計專家系統」,國科會研究報告,(NSC 79-0401-E011-05).
20.林榮慶,黃佑民,唐永新, 1991,「國產鋼材之成形性及切削特性研究」,國科會研究報告,(NSC 80-0422-E011-02).
21.林榮慶, 1992,「鈑金專家系統之研究(一)」,金屬中心計畫報告(1991),工業研究中心報告第67號。
22.劉清田、林榮慶、楊鍵樵、許總欣、潘昭賢, 1991,「工業自動化人才培訓五年計畫規劃」,經濟部工業局專案計畫執行成果報告。
23.林榮慶, 1992,「正交切削之偶合熱彈塑性大變形有限元素模式」,國科會研究報告,(NSC80-0401-E011-06).
24. 林榮慶, 1992, 「三次元量床測量順序之最佳化」, 國科會研究報告,(NSC
81-0422-E011-06).
25.林榮慶, 1992,「鈑金專家系統之研究(二)」,金屬中心研究計畫報告。
26.劉清田、林榮慶、楊鍵樵、許總欣、潘昭賢, 1992,「工業自動化人才培訓五年計畫之規劃<第二年>」,經濟部工業局專案計畫執行成果報告。
27.劉清田、林榮慶、楊鍵樵、許總欣、潘昭賢, 1992,「工業自動化人才培訓五年計畫第一年開課計畫(一)」,經濟部工業局專案計畫執行成果報告。
28.劉清田、楊鍵樵、林榮慶、潘昭賢、周宜雄、許新添, 1992,「電腦整合製造訓練中心五年計畫<第一年>」,經濟部工業局專案計畫執行成果報告。
29.林榮慶, 1993,「向前擠製偶合熱彈塑性大變形模式及其疊代法分析研究」,國科會研究報告,(NSC 81-0401-E011-554).
30.林榮慶, 1993,「鈑金專家系統之研究(三)」,金屬工業研究中心研究計畫報告。
31.林榮慶, 1993,「正交切削偶合熱彈塑大變形改良切削模式建立刀具磨耗影響分析」,國科會研究報告,(NSC 82-0422-E011-015).
32.劉清田、楊鍵樵、林榮慶、潘昭賢、周宜雄、許新添, 1993,「電腦整合製造訓練中心計畫<第二年>」,經濟部工業局專案計畫執行成果報告。
33.劉清田、林榮慶、楊鍵樵、廖慶隆、潘昭賢, 1993,「工業自動化人才培訓五年計畫規劃<第三年>」,經濟部工業局專案計畫執行成果報告。
34.劉清田、林榮慶、楊鍵樵、廖慶隆、潘昭賢, 1993,「工業自動化人才培訓五年計畫第二年開課計畫(一)」,經濟部工業局專案計畫執行成果報告。
35.林榮慶, 1994,「鋁板材對稱軋延之三維偶合熱彈塑性大變形有限元素法分析」,
國科會研究報告,(NSC 83-0401-E011-153).
36.劉清田、楊鍵樵、林榮慶、潘昭賢、周宜雄、許新添, 1994,「電腦整合製造訓練中心計畫<第三年>」,經濟部工業局專案計畫執行成果報告。
37.劉清田、林榮慶、楊鍵樵、廖慶隆、潘昭賢, 1994,「工業自動化人才培訓五年計畫規劃<第四年>」,經濟部工業局專案計畫執行成果報告。
38.劉清田、林榮慶、楊鍵樵、廖慶隆、潘昭賢, 1994,「工業自動化人才培訓五年計畫第三年開課計畫(一)」,經濟部工業局專案計畫執行成果報告。
39.林榮慶、洪振聰, 1994,「電腦輔助鈑金展開專家系統及資料庫的研究」,第一年金屬工業研究中心研究計畫報告。
40.林榮慶, 1995,「三維偶合熱彈塑有限元素新模式研究及軋延成形應用」,國科會研究報告,(NSC 84-2212-E011-007).
41.林榮慶、張永全, 1995,「電腦輔助鈑金展開專家系統及資料庫的研究」,第二年金屬工業研究中心研究計畫報告。
42.林榮慶, 1995,「智慧型製程規劃/快速成形系統/電腦輔助量測之整合研究」,國科會研究報告,(NSC 84-2212-E011-018).
43.劉清田、楊鍵樵、林榮慶、潘昭賢、周宜雄、許新添, 1995,「電腦整合製造訓練中心計畫<第四年>」,經濟部工業局專案計畫執行成果報告。
44.劉清田、林榮慶、楊鍵樵、廖慶榮、潘昭賢, 1995,「工業自動化人才培訓五年計畫規劃<第五年>」,經濟部工業局專案計畫執行成果報告。
45.劉清田、林榮慶、楊鍵樵、廖慶榮、潘昭賢, 1995,「工業自動化人才培訓五年計畫第四年開課計畫(一)」,經濟部工業局專案計畫執行成果報告。
46.林榮慶、李春伯、吳翼貽、呂森林、鄭正元, 1996,「後裝密封壓縮式垃圾車本土化性能改進分析」,中科院經濟部科技研究發展專案計劃報告書。(技合建字0875號)
47.林榮慶、李春伯、吳翼貽、呂森林、鄭正元, 1996,「資源回收原形車結構與功能評估分析」,綠大地環保精機有限公司建教案報告書。(技合建字0942號)
48.劉清田、楊鍵樵、林榮慶、潘昭賢, 1996,「工業自動化人才培訓計畫」,經濟部工業局專案計畫報告書。(84年7月1日到85年6月30日)
49.林榮慶, 1996,「智慧型製程規劃/快速成形系統/電腦輔助量測之整合研究(第二年計畫)」,國科會研究報告,(NSC 85-2212-E-011-022).
50.林榮慶, 1996,「步進投影式對準機覆蓋精度分析及模式發展研究」,國科會研究報告,(NSC 85-2221-E-011-008).
51.劉清田,楊鍵樵,林榮慶,潘昭賢, 1997,「工業自動化人才培訓計畫」,經濟部工業局專案計畫報告書(85 年7 月1 日到86 年6 月30 日).
52.林榮慶,李春伯,吳翼貽,呂森林,鄭正元,林顯群, 1997,「溝泥車性能改進本土化研製之研究」,中科院委託學界研究計畫報告書.(技合建字1007 號)
53.林榮慶, 1997,「三維偶合熱彈塑之軋延接觸問題研究」,國科會研究報告,(NSC 86-2212-E011-005).
54.賴士葆,林榮慶,楊條和,蔡渭水,陳松柏, 1998,「國家度量衡標準與產業之關聯研究」,經濟部中央標準局委辦案研究報告(86 年12 月3 日_________起87 年5 月31 日止).
55.林榮慶, 1998,「建立刀面幾何控制切層流線之三維切削熱彈塑有限元素模式」,國科會研究報告,(NSC 87-2212-E011-010).
56.林榮慶,李春伯,吳翼貽,呂森林,鄭正元,林顯群, 1998,「本土化溝泥車性能之測試與評估」,中科院委託學界研究計畫報告書.(技合建字1007 號)
57.劉清田,楊鍵樵,林榮慶,潘昭賢, 1998,「工業自動化人才培訓計畫」,經濟部工業局專案計畫報告書(86 年7 月1 日到87 年6 月30 日).
58. 劉清田,楊鍵樵,林榮慶,潘昭賢, 1999,「工業自動化人才培訓計畫」,經濟部工業局專案計畫報告書(87 年7 月1 日到88 年6 月30 日)
59.林榮慶,陳南鳴,吳翼貽,王慶煌,成維華,張有恆,1998,「軌道系統教育中程改進計畫先期規劃」,教育部顧問室委辦案研究報告.
60. 林榮慶,1999, 「三維型輥軋延之熱彈塑偶合模式研究」, 國科會研究報告,(NSC88-2212-E-011-004).
61. 林榮慶,1999, 「光蝕刻成像之覆蓋精度改進研究」, 國科會研究報告,(NSC88-2212-E-011-021).
62.林榮慶,李春伯,呂森林,蔡顯榮,吳翼貽,1999,「輕軌車認證工程研究」,中科院委託學界研究計畫報告書.(研發建字1240 號)
63.林榮慶,吳翼貽,1999,「軌道系統教育種子師資國外培訓計畫後續推動計畫」,教育部顧問室委辦案研究報告(87 年12 月1 日到88 年8 月31 日).
64.林榮慶,2000,「不連續切屑之三維正交切削及斜交切削熱彈塑有限元素模式研究(1/2)」,國科會研究報告,（NSC89-2212-E011-005）.
65. 林榮慶,2000, 「IC 構裝機之連續沖模設計與製造(1/3) 」, 國科會報告（NSC89-2212-E011-025）.
66.林榮慶,2000,「不連續切屑之三維正交切削及斜交切削熱彈塑有限元素模式研究(2/2)」,國科會研究報告,（NSC89-2212-E011-054）.
67. 林榮慶,2000, 「IC 構裝機之連續沖模設計與製造(2/3) 」, 國科會報告,（NSC89-2212-E011-056）.
68. 林榮慶,2001, 「IC 構裝機之連續沖模設計與製造(3/3) 」, 國科會報告,（NSC90-2212-E011-039）.
69. 林榮慶,2001, 「奈米精密加工正交切削模式建立之研究」, 國科會報告,（NSC90-2212-E011-026）.
70.林榮慶,吳翼貽,2001,「輕軌車認證工程分析(III)」,中科院報告（90-EC-2-A-17-0510）.
71.林榮慶、吳翼貽、成維華, 2002, 「軌道監測車擷取資訊及資料處理系統研製」,高鐵局委託學界計畫報告書,(研發建字1454 號) .
72.林榮慶, 2003, 「矩陣表示線性最小平方差之逆解金屬成形熱彈塑大變形有限元素模式研究(1/3)」,國科會報告,(NSC91-2212-E-011-037).
73.林榮慶、陳介力、鄭友仁、覺文郁, 2003, 「奈米級兆位元資訊儲存等級關鍵工程技術系統化研究」,國科會報告,(NSC91-2218-E-011-001).
74. 林榮慶, 2004, 「矩陣表示線性最小平方差之逆解金屬成形熱彈塑大變形有限元素模式研究(2/3)」,國科會報告,(NSC92-2212-E-011-008).
75.林榮慶,2004,「迴轉式氣壓致動器運動之阻尼係數逆解模式研究」,國科會報告,(NSC92-2212-E-011-041).