




趙振綱
個人網站 
機械工程系(所) 


學經歷： 

學歷:
B.S. National Cheng Kung University  Mechanical Engineering (19741978)
M.S. National Taiwan University  Mechanical Engineering (19781980)
Ph.D. Lehigh University  Mechanical Engineering (19821987)
經歷：
2006– present : Chair Professor of Department of Mechanical Engineering, NTUST
1992 – present : Professor of Department of Mechanical Engineering, NTUST
1987 – 1992 : Associate Professor of Department of Mechanical Engineering, NTUST
1980 – 1982 : Second Lieutenant Engineering Officer, The Combined Military Service
1995 – present : Associate Editor of the Journal of Mechanics.
2002 – 2008 : Subject Editor of the Journal of the Chinese Institute of Engineers
2005 –Present : Member of the Editorial Board of Journal of Aeronautics, Astronautics and Aviation
2007 : General Chair of the 7th International Congress on Thermal Stresses (ICTS)
2007 – 2013 : Member of the Executive Committee of ICTS
2008 : Member of the Executive Committee of ACMFMS, Matsue, Japan
2008 – 2013 : Member of the Editorial Board of Journal of Thermal Stresses
2008 – 2013 : Member of the Editorial Board of Journal of Theoretical and Applied Multiscale Mechanics
2008 : Invited to be a Keynote Speaker of the 1th International Conference on Mechanics of Functional Materials and Structures (ACMFMS)
2009 : Invited to be a Keynote Speaker of the International Conference ICCES09
2009 : Invited to be a Keynote Speaker of the 8th International Congress on Thermal Stresses (ICTS)
2009 : Invited to be a Keynote Speaker of the International Congress on Mesomechanics
2009/6– 2009/12 : Visiting Professor at Department of Engineering Science, Fellow of Trinity College, University of Oxford, UK
2010 : General Chair of the 12th International Conference on Mesomechanics, Taipei, Taiwan

專業技術


Fracture Mechanics, Advanced Engineering Mathematics, Dynamics, Continuum Mechanics, Theory of Elasticity (I) & (II), Introduction to Fracture Mechanics
(破壞力學, 高等工程數學, 動力學, 連體力學, 彈性力學, 高等彈性力學, 破壞力學概論) 


專利介紹







研究計畫


教授課程
破壞力學, 高等工程數學, 動力學, 連體力學, 彈性力學, 高等彈性力學, 破壞力學概論
榮譽獎項
1995 – 1996 : Outstanding Research Awards, National Science Council, ROC
1998 – 1999 : Outstanding Research Awards, National Science Council, ROC
2000 – 2001 : Outstanding Research Awards, National Science Council, ROC
2002 – 2005 : Distinguished Research Fellow, National Science Council, ROC
2005 – 2008 : Distinguished Research Fellow, National Science Council, ROC
2006 : Best paper award for Society of Surgery of the Hand, ROC
2007 : General Chair of the 7th International Congress on Thermal Stresses (ICTS)
2008 : Journal of Thermal Stresses (Editor)
2008 : Best award paper for Society of Surgery of the Spine, ROC
2008 : Member of the Executive Committee of ACMFMS, Matsue, Japan
2009 : Member of the Executive Committee of ICTS, Illinois, USA
2010 : General Chair of the 12th International Conference on Mesomechanics, Taipei, Taiwan
Refereed Papers
[A1] Sih, G. C. and Chao, C. K., 1984, "Size Effect of Cylindrical Specimens with
Fatigue Cracks", J. Theoret. Appl. Fracture Mech., 1(3), pp. 239247.
[A2] Sih, G. C. and Chao, C. K., 1984, "Failure Initiation in Unnotched Specimens
Subjected to Monotonic and Cyclic Loading", J. Theoret. Appl. Fracture Mech.,
2(1), pp. 6773.
[A3] Sih, G. C. and Chao, C. K., 1984, "Influence of Load Amplitude and Uniaxial
Tensile Properties on Fatigue Crack Growth", J. Theoret. Appl. Fracture Mech.,
2(3), pp. 247257.
[A4] Sih, G. C. and Chao, C. K., 1986, "Static and Fatigue Behavior of Metal
Cylinders with Enhanced Surface Property", J. Theoret. Appl. Fracture Mech.,
5(1), pp. 3945.
[A5] Chao, C. K., 1986, "Stability of Cracks Interacting in Fibers", Advanced
Composite Materials and Structures, edited by G. C. Sih and S. E. Hsu, VNU
Science Press, The Netherlands, pp. 365374.
[A6] Sih, G. C., Lieu, F. L. and Chao, C. K., 1987, "Thermal/Mechanical Damage of
6061T6 Aluminum Tensile Specimen", J. Theoret. Appl. Fracture Mech., 7(2),
pp. 6778.
[A7] Sih, G. C. and Chao, C. K., 1989, "Fatigue Failure Initiation Analysis of
Wing/Fuselage Bolt Assembly", J. Theoret. Appl. Fracture Mech., 11(2), pp.
109120.
[A8] Sih, G. C. and Chao, C. K., 1989, "Scaling of Size/Time/TemperaturePart 1:
Progressive Damage in Uniaxial Tensile Specimen", J. Theoret. Appl. Fracture
Mech., 12(2), pp. 93108.
[A9] Sih, G. C. and Chao, C. K., 1989, "Scaling of Size/Time/TemperaturePart 2:
Progressive Damage in Uniaxial Compressive Specimen", J. Theoret. Appl.
Fracture Mech., 12(2), pp. 109119.
[A10] Chao, C. K. and Lin, S. Y., 1990, "Failure Stability of a Cracked Layer between
Dissimilar Materials", J. Theoret. Appl. Fracture Mech., 13(1), pp. 5968. (NSC
780401E01104)
[A11] Sih, G. C., Chao, C. K., Hwu, Y. J. and Hsu, C. T., 1990, "Spring Back in Cold
Metal Forming of AOOH Steel: NonHomogeneous Defermation", J. Theoret.
Appl. Fracture Mech., 14(2), pp. 8199. (NSC 780401E01103)
[A12] Chao, C. K. and Shie, J. J., 1991, "Stability of Failure Initiation by Fracture for
a BiMaterial Body with an Edge Crack", Applied Mechanics Reviews, 44(5), pp.
745746.
[A13] Sih, G. C., Chao, C. K., Liu, C. H. and Lin, S. Y., 1991, "Deep Drawing of
Plastically and Incrementally Deformed Circular Cylindrical Cup", J. Theoret.
Appl. Fracture Mech., 15(3), pp. 3561.
[A14] Chao, C. K. and Yu, C. H., 1991, "Failure Analysis of Pressure Vessel by Strain
Energy Density Theory", J. the Chinese Society of Mechanical Engineers, 12(2),
pp. 137149.
[A15] Chao, C. K. and Chang, R. C., 1991, "Failure Analysis of a Thermoelastic
Cracked Plate by Formulating the Hilbert Problem", J. the Chinese Society of
Mechanical Engineers, 12(2), pp. 128136. (NSC 790401E01108)
[A16] Chao, C. K. and Tseng, C. C., 1992, "Stability of Failure Initiation by Fracture
for Fibrous Composite with Central Crack", J. Engineering Fracture Mechanics,
41(1), pp. 91102. (NSC 800401E01104)
[A17] Chao, C. K. and Chang, R. C., 1992, "Central Crack in Anisotropic Elastic
Solid", J. the Chinese Society of Mechanical Engineers, 13(3), pp. 189197.
[A18] Chao, C. K. and Chang, R. C., 1992, "Crack Trajectories Influenced by
Mechanical and Thermal Disturbance in Anisotropic Material", J. Theoret. Appl.
Fracture Mech. 17(3), pp. 177187. (NSC 810401E011558)
[A19] Chao, C. K. and Chang, R. C., 1992, "Thermal Interface Crack Problems in
Dissimilar Anisotropic Media", J. Applied Physics, 72(7), pp. 25982604.
[A20] Chao, C. K. and Shen, M. H., 1992, "Mixed Mode Fracture for Two Collinear
Cracks in Anisotropic Medium", J. the Chinese Society of Mechanical
Engineers, 13(6), pp. 581585.
[A21] Chao, C. K., Liu, C. H. and Wu, H. J., 1993, "Numerical and Failure Analysis
on the Drawing of a Circular Cylindrical Cup", J. Engineering Fracture
Mechanics, 45(4), pp. 439450.
[A22] Chao, C. K. and Tseng, C. C., 1993, "A PowerRateDependent Model for
Pellet/Cladding Mechanical Interaction", J. Nuclear Society Technology, 101(2),
pp. 202211.
[A23] Chao, C. K. and Tseng, C. C., 1993, "Pellet Crack Mechanism at Power Ramps",
J. Nuclear Materials, 199, pp. 159166.
[A24] Chao, C. K. and Chang, R. C., 1993, "Hygrothermal Stresses for a Plane Crack
in a Generally Anisotropic Plate", J. Engineering Fracture Mechanics, 45(6), pp.
831841.
[A25] Chao, C. K. and Chang, R. C., 1993, "SteadyState Heat Conduction Problem of
the Interface Crack between Dissimilar Anisotropic Media", Int. J. Heat and
Mass Transfer, 36(8), pp. 20212026.
[A26] Chao, C. K. and Shen, M. H., 1993, "Thermal Problem of Curvilinear Cracks in
Bonded Dissimilar Materials", J. Applied Physics, 73(11), pp. 71297137. (NSC
820401E01104)
[A27] Chao, C. K. and Shen, M. H., 1993, "Explicit Solutions for Curvilinear Cracks
in the Thermoelastic Medium", J. Thermal Stresses, 16(3), pp. 215231.
[A28] Chao, C. K. and Wang, J. L., 1993, "Failure Prediction of a Plate Weakened by
an Elliptic Hole under Thermal or Mechanical Load", J. Engineering Fracture
Mechanics, 45(6), pp. 843856.
[A29] Chao, C. K. and Shen, M. H., 1993, "Thermoelastic Problem of Curvilinear
Cracks in Bonded Dissimilar Materials", International Journal of Solids and
Structures 30(22), pp. 30413057.
[A30] Chao, C. K., and Kuo, L. Y., 1993, "Thermal Problem of Curvilinear Crack in
Bonded Dissimilar Materials with a Point Heat Source", International Journal
of Heat and Mass Transfer, 36(17), pp. 40854093.
[A31] Chao, C. K., and Tseng, C. C., 1993, "Study on Barrier Fuel Zirconium Liner for
Rod Failure", Journal of Nuclear Engineering and Design, 144, pp. 509515.
[A32] Chang, R. C., and Chao, C. K., 1993, "General Solution to the
Hygrothermoelastic Interface Problem with Discontinuity between Dissimilar
Anisotropic Media", Journal of Applied Physics, 74(12), pp. 70857093. (NSC
830401E011074)
[A33] Chao, C. K., Liu, C. H. and Wu, H. J., 1994, "A study of the Stretching Process
of SteelPolymerSteel Laminate", J. Materials Processing Technology, 40, pp.
155172.
[A34] Chao, C. K. and Huang, W. J., 1994, "Antiplane Problem of Curvilinear Cracks
in Bonded Dissimilar Materials", International Journal of Fracture, 64(3), pp.
179190.
[A35] Chao, C. K. and Kuo, L. Y., 1994, "Thermoelastic Problem of Curvilinear Crack
with a Point Heat Source", J. Thermal Stresses, 17(2), pp. 271283.
[A36] Chao, C. K. and Chang, R. C., 1994, "Thermoelastic Problem of Dissimilar
Anisotropic Solids with a Rigid Line Inclusion", Journal of Applied Mechanics,
Transactions of the ASME, 61, pp. 978980.
[A37] Shen, M. H. and Chao, C. K., 1994, "Explicit Solutions for the Elastic and
Thermoelastic Fields with a Rigid CircularArc Inclusion", International
Journal of Fracture, 65(1), pp. 118.
[A38] Chao, C. K. and Chang, R. C., 1994, "Analytical Solutions and Numerical
Examples for the Thermoelastic Interface Crack Problems in Dissimilar
Anisotropic Media", Journal of Thermal Stresses, 17(2), pp. 285299.
[A39] Chao, C. K. and Shen, M. H., 1995, "CircularArc Inclusion at Isotropic
Bimaterial Interface", AIAA Journal, 33(2), pp. 332339.
[A40] Chao, C. K. and Shen, M. H., 1995, "Solutions of Thermoelastic Crack
Problems in Bonded Dissimilar Media or HalfPlane Medium", International
Journal of Solids and Structures, 32(24), pp. 35373554.
[A41] Chao, C. K. and Wu, S. P., 1995, "Explicit Solutions for the Antiplane Problem
of Bonded Dissimilar Materials with Two Concentric CircularArc Inclusions",
Journal of Energy Resources Technology, Transactions of the ASME, 117(1), pp.
16.
[A42] Chao, C. K. and Chen, S. J., 1996, "Stress Intensity Factors of Two Bonded
HalfPlane Problem with a Point Heat Source", Nuclear Engineering and
Design, 160(1), pp. 97109.
[A43] Chao, C. K. and Lee, J. Y., 1996, "Interaction Between a Crack and a Circular
Elastic Inclusion under Remote uniform Heat Flow", International Journal of
Solids and Structures, 33(26), pp. 38653880.
[A44] Chao, C. K. and Chiang, T. F., 1996, "Antiplane Interaction of an Anisotropic
Elliptic Inclusion with an Arbitrarily Oriented Crack", International Journal of
Fracture, 75(3), pp. 229245.
[A45] Tseng, C. C. and Chao, C. K., 1996, "Fuel Rod Load Follow Analysis", Journal
of Nuclear Materials, 228(3), pp. 284289.
[A46] Chao, C. K. and Wang, J. W., 1997, "Thermal Stress of a Subsurface Inclined
Crack Subjected to a Point Heat Source", Journal of Energy Resources
Technology, Transactions of the ASME, 119(1), pp. 3844.
[A47] Chao, C. K., Shen, M. H. and Fung, C. K., 1997, "On Multiple Circular
Inclusions in Plane Thermoelasticity", International Journal of Solids and
Structures, 34(15), pp. 18731892. (NSC 842212E011022)
[A48] Chao, C. K. and Kao, B., 1997, "A Thin Cracked Layer Bonded to an Elastic
HalfSpace under an Antiplane Concentrated Load", International Journal of
Fracture, 83(3), pp. 223241.
[A49] Chao, C. K., 1997, "Boundary Integral Equations for Notch Problems in Plane
Thermoelasticity", AIAA Journal, 35(8), pp. 14201422. (NSC
852212E011007)
[A50] Chao, C. K. and Shen, M. H., 1997, "On Bonded Circular Inclusions in Plane
Thermoelasticity", Journal of Applied Mechanics, Transactions of the ASME,
64(4), pp. 10001004. (NSC 862212E011006)
[A51] Chao, C. K. and Young, C. W., 1998, "Antiplane Interaction of a Crack with a
Circular Inclusion in an Elastic HalfPlane", Journal of Engineering Mechanics,
ASCE, 124(2), pp. 167175.
[A52] Chao, C. K., 1998, “On Multiple Piezoelectric Inclusions Embedded in an
Intelligent Material,” Key Engineering Materials, 145149, pp. 9991004.
[A53] Chao, C. K. and Shen, M. H., 1998, "Thermal Stresses in a Generally
Anisotropic Body with an Elliptic Inclusion Subject to Uniform Heat Flow",
Journal of Applied Mechanics, Transactions of the ASME, 65(1), pp. 5158.
[A54] Chao, C. K. and Kao, B., 1998, "Explicit Solutions of Plane Elastostatics
Problems in Heterogeneous Solids", Journal of Mechanics, 14(2), pp. 6773.
[A55] Chao, C. K. and Young, C. W., 1998, "On the General Treatment of Multiple
Inclusions in Antiplane Elastostatics", International Journal of Solids and
Structures, 35(26), pp. 35733593.
[A56] Wang, C. H. and Chao, C. K., 1999, “Green’s Function for a Point Heat Source
in an Anisotropic Body Containing an Elliptic Hole or a Rigid Inclusion,
Journal of Mechanics, 15(3), pp. 8995.
[A57] Shen, M. H. and Chao, C. K., 1999, "Thermal Stresses of Bonded Dissimilar
Materials with a CircularArc Anticrack", Journal of Thermal Stresses, 22(3), pp.
637657.
[A58] Chao, C. K., Wu, S. P. and Gao, B., 1999, "Thermoelastic Contact between a
Flat Punch and an Anisotropic HalfSpace", Journal of Applied Mechanics,
Transactions of the ASME, 66(2), pp. 548552.
[A59] Chao, C. K. and Chang, K. J., 1999, "Interacting Circular Inclusions in
Antiplane Piezoelectricity", International Journal of Solids and Structures,
36(22), pp. 33493373.
[A60] Chao, C. K., Tsai, S. C. and Wang, C. H., 1999, “Thermal Stresses in an Infinite
Body with a Partially reinforced Elliptic Hole – A Type of Mixed
BoundaryValue problems,” Journal of The Chinese Institute of Engineers,
22(3), pp. 285292.
[A61] Chao, C. K. and Heh, T. Y., 1999, "Thermoelastic Interaction between a Hole
and an Elastic Circular Inclusion," AIAA Journal. 37(4), pp. 475481.
[A62] Chao, C. K. and Kao, B., 2000, "Rigid Stamp Indentation for a Thermoelastic
HalfPlane", International Journal of Solids and Structures, 37, pp. 46354654.
[A63] Chao, C. K. and Tan, C, J., 2000, "On the General Solutions for Annular
Problems with a Point Heat Source," Journal of Applied Mechanics,
Transactions of the ASME, 67(3), pp.551558.
[A64] Chao, C. K. and Chang, R. C., 2000, “Damage Evaluation of TwoLayer Targets
Impacted by a Projectile,” International Journal of Impact Engineering, 24, pp.
299311.
[A65] Chao, C. K. and hsiao, C. C., 2000, "Boundary Integral Equations for Notch
Problems in an Anisotropic HalfSpace," International Journal of Fracture, 105,
pp. 137159.
[A66] Chang, R. C., Wang, S. C. and Chao, C. K., 2001, "Effects of a Viscoelastic
Substrate on a Cracked Body under InPlane Concentrated Loading," Acta
Mechanica, 148, pp. 215230.
[A67] Chao, C. K. and Gao, B., 2001, "Mixed Boundary Value Problems of
TwoDimensional Anisotropic Thermoelasticity with Elliptic Boundaries,"
International Journal of Solids and Structures, 38, pp. 59755994.
[A68] Chao, C. K. and Chang, K. W., 2001, "Contact Stresses in an Infinite Plate
Containing a Rigid Circular Inclusion under Thermal Loads," Acta Mechanica,
152, pp. 95108.
[A69] Wang, C. H. and Chao, C. K., 2002, "On Perturbation Solutions for Nearly
Circular Inclusions in Plane Thermoelasticity," Journal of Applied Mechanics,
Transactions of the ASME, 69(1), pp. 3644.
[A70] Chao, C. K., Hsiao, C. C., and Chen, P. Q., 2002, "Optimal Distal Screw
Alignment in the Gamma nail," Journal of Mechanics, 18(2), pp. 103108.
[A71] Wang, C. H. and Chao, C. K., 2003, "On approximate Solutions for
TwoDimensional Thermoelastic Problems with a Nearly Circular Hole,"
Journal of Mechanics, 19(1), pp. 149160.
[A72] Chao, C. K., and Gao, B., 2003, "Indentation Problems of TwoDimensional
Anisotropic Thermoelasticity with Perturbed Boundaries," Journal of Applied
Mechanics, Transactions of the ASME, 70(2), pp. 169179.
[A73] Chao, C. K., Hung, S. Y., and Yu, C. C., 2003, "Thermal Stress for Rapid
Thermal Processor," IEEE Transactions on Semiconductor Manufacturing,
16(2), pp. 335341.
[A74] Chao, C. K., Hung, S. Y., and Yu, C. C., 2003, "The Effect of Lamps Radius on
Thermal Stresses for Rapid Thermal Processing System," Journal of
Manufacturing Science and Engineering, Transactions of the ASME, 125, pp.
504511.
[A75] Chao, C. K., Hung, S. Y., 2003, "Stress Analysis in the Vertical Bridgman
Growth with the Modified Thermal Boundary Condition," Journal of Crystal
Growth, 256, pp. 107115.
[A76] Hsu, C. C., Wang, J. L., Hou, S. M., Lin, J., and Chao, C. K., 2003, “Pushout
Strength of Tibial Locking Screws: Development of the Finite Element
Models,” Journal of The Chinese Institute of Engineer, 26, pp. 817823.
[A77] Lin, C. P., Yang, H., and Chao, C. K., 2003, "A New Microlens Array
Fabrication Method Using UV Proximity Printing," Journal of Micromechanics
and Microengineering, 13, pp. 748757.
[A78] Lin, C. P., Yang, H., and Chao, C. K., 2003, "Hexagonal Microlens Array
Modeling and Fabrication Using a Thermal Reflow Process," Journal of
Micromechanics and Microengineering, 13, pp. 775781.
[A79] Yang, H., Chao, C. K., Lin, C. P., and S. C. Shen, 2004, "MicroBall Lens Array
Modelling and Fabrication Using Thermal Reflow in Two Polymer Layers,"
Journal of Micromechanics and Microengineering, 14, pp. 277282.
[A80] Hsiao, C. C., Chao, C. K. and Chang, R. C., 2004, "Stress Analysis of an Elastic
Cracked Layer Bonded to a Viscoelastic Substrate," International Journal of
Solids and Structures, 41, pp. 14351451.
[A81] Chao, C. K., and Chen, F. B., 2004, "Approximate Solution of Contact Stress for
a Smooth Disk in an Infinite Plate under Thermal Loads," Acta Mechanica, 168,
pp. 195212.
[A82] Hou, S. M., Hsu, C. C., Wang, J. L., Chao, C. K., and Lin, J., 2004, "Mechanical
Tests and Finite Element Models for Bone Holding Power of Tibial Locking
Screws," Clinical Biomechanics, 19, pp. 738745.
[A83] Yang, H., Chao, C. K., Wei, M. K., and Lin, C. P., 2004, "High FillFactor
Microlens Array Modelling and Fabrication Using a Thermal Reflow Process,"
Journal of Micromechanics and Microengineering, 14, pp. 11971204.
[A84] Chao, C. K., Chen, F. M., and Shen, M. H., 2004, "Thermal Stresses in an
Isotropic Trimaterial Interacted with a Pair of Point Heat Source and Heat
Sink," International Journal of Solids and Structures, 41, pp. 62336247.
[A85] Chao, C. K., and Chang R. C., 2004, “Application of Energy Density Theory of
Finite Cracked Bodies,” Journal of The Chinese Institute of Engineer, 27, pp.
799804.
[A86] Hung, S. Y., and Chao, C. K., 2005, "Thermal Stress Analysis for Rapid
Thermal Process with Convective Cooling," Journal of Manufacturing Science
and Engineering, Transactions of the ASME, 127, pp. 564571.
[A87] Hung, S. Y., Chao, C. K., and Hsu, C. K., 2005, "Lamp Design for Fast Cooling
of Rapid Thermal Process with TwoZone Lamp Using Step Cooling Process"
Semiconductor Science and Technology, 20, pp. 7279.
[A88] Hsu, C. C., Chao, C. K., Wang, J. L., Hou, S. M. Tsai, Y. T., and Lin, J., 2005,
"Increase of Pullout Strength of Spinal Screws with Conical Core:
Biomechanical Tests and Finite Element Analysis,” Journal of Orthopaedic
Research, 23(4), pp. 788794.
[A89] Hung, S. Y., Chao, C. K., Lin, T. H., and Lin, C. P., 2005, "Applying ANN/GA
algorithm to optimize the high fillfactor microlens array fabrication using UV
proximity printing process," Journal of Micromechanics and Microengineering,
15, pp. 23892397.
[A90] Yang, H., Chao, C. K., Lin, T. H., and Lin, C. P., 2005, “Fabrication of
Microlens Array with Graduated Sags Using UV Proximity Printing Method,”
Microsystem Technologies, 12, pp. 8290.
[A91] Chang, R. C., Chao, C. K., Chuang, C. T., and Yang, P. H., 2006,
“TimeDependent Effect of Viscoelastic Substrate on a Cracked Body Under
Inplane Load,” Key Engineering Materials, 306308, pp. 477482.
[A92] Chao, C. K., Chen, F. M., and Shen, M. H., 2006, "Circularly Cylindrical
Layered Media in Plane Elasticity," International Journal of Solids and
Structures, 43, pp. 47394756.
[A93] Hsu, C. C., Chao, C. K., Wang, J. L., and Lin, J., 2006, "Multiobjective Design
Optimization of Tibial Locking Screws Using Genetic Algorithm: Evaluation of
Mechanical Performance,” Journal of Orthopaedic Research, 24, pp. 908916.
[A94] Chao, C. K., Hsiao, C. C., 2006, "Parametric Analysis on Bone Screw Designs
for Holding Power," Journal of Mechanics, 22, pp. 1318.
[A95] Chuang, W. C, Ho, C. T., Lian, Y. R., Chao, C. K., Shyu, R. F., and Wang, W. C.,
2006, “Transducing Mechanical Forces Using a Polymer Optical Grating
Sensor,” Material Science Forum ICAM, V. 501, pp. 9196.
[A96] Chao, C. K., Chen, F. M., and Shen, M. H., 2006, "Green’s Functions for a Point
Heat Source for Circularly Cylindrical Layered Media" Journal of Thermal
Stresses, V. 29, pp. 809847.
[A97] Chao, C. K., Chen, F. M., and Shen, M. H., 2007, "An Exact Solution for
Thermal Stresses in a ThreePhase Composite Cylinder Subject to Uniform
Flow" International Journal of Solids and Structures, 44, pp. 926940.
[A98] Chao, C. K., Chen, J. Q., Yang, K. C., and Tseng, C. C., 2007, “Analysis of
Creep Crack Growth on Spent Fuel Zircaloy Cladding in Interim Storage,”
Journal of Theoretical and Applied Fracture Mechanics, 47, pp. 2634.
[A99] Chao, C. K., Hsu, C. C., Wang, J. L., and Lin, J., 2007, "Increasing the Bending
Strength of Tibial Locking Screws: Mechanical Tests and Finite Element
Analyses,” Clinical Biomechanics, 22, pp. 5966.
[A100] Lin, T. H., Yang, H., and Chao, C. K., 2007, “Concave Microlens
Array Mold Fabrication in Photoresist Using NG UV Proximity Printing",
Microsystem Technologies, 13, pp. 15371543.
[A101] Su, A. J., Jeng, J. C., Huang, H. P., Yu, C. C., Hung, S. Y., and Chao, C. K.,
2007, “Control relevant issues in semiconductor manufacturing: overview with
some new results,” Control Engineering Process (ADCHEM Special Issue, 15,
pp. 12681279.
[A102] Chuang, W. C., Chao, C. K., and Ho, C. T., 2007, “Fabrication of
HighResolution Periodical Structures on Polymer Waveguides Using a
Replication Process,” Optics Express, 15, pp. 86498659.
[A103] Lin, T. H., Hung, S. Y., Yang, H., and Chao, C. K., 2007, “Fabrication
of a Microlens Array Electroformed Mold with Low Roughness and High
Hardness", Journal of Micromechanics and Microengineering, 17, pp. 419425.
[A104] Chao, C. K., Chuang, J. T., and Chang, R. C., 2007, “Thermal Stresses in a
Viscoelastic ThreePhase Composite Cylinder,” Journal of Theoretical and
Applied Fracture Mechanics, 48, pp. 258268.
[A105] Chao, C. K., Yang, K. C., and Tseng, C. C., 2008, “Rupture of Spent Fuel
Zircaloy Cladding in Dry Storage Due to Delayed Hydride Cracking,” Nuclear
Engineering and Design, 238 (1), pp. 124129.
[A106] Chao, C. K., Hsu, C. C., Wang, J. L., and Lin, J., 2008, "Increasing
Bending Strength and Pollout Strength in Conical Pedicle Screws:
Biomechanical Tests and Finite Element Analyses, “ Journal of Spinal
Disorders and Techniques, 21, pp. 130138.
[A107] Porter, G. A., Chuang, S. T., Chao, C. K., Chang, R. C., 2008, “Thermal
Stresses in a Viscoelastic TriMaterial with a Combination of a Point Heat
Source and a Point Heat Sink,” Journal of Engineering Mathematics, 61, pp.
99109.
[A108] Chuang, W. C., Chao, C. K., Chang, W. C., and Ho, C. T., 2008, “Fabrication
of High Aspect Ratio Periodical Structure on Metal Using an Electroforming
Process,” Key Engineering Materials, 364366, pp. 280283.
[A109] Chuang, C. T., Chao, C. K., Chang, R. C., and Chu, K. Y., 2008, “Effects of
Internal Stresses on the Mechanical Properties of Diposition Thin Films,”
Journal of Material Processing Technology, 201, pp. 770774.
[A110] Lin, T. H., Yang, H., Shyu, R. F., and Chao, C. K., 2008, “New Horizontal
Frustum Optical Waveguide Fabrication Using UV Proximity Printing",
Microsystem Technologies, 14, pp. 10351040.
[A111] Hu, J. Y., Lin, C. P. Hung, S. Y., Yang, H., and Chao, C. K., 2008,
“SemiEllipsoid Microlens Simulation and Fabrication for Enhancing Optical
Fiber Coupling Efficiency", Sensors and Actuators A: Physical, 147, pp.
9398.
[A112] Chen, F. M., and Chao, C. K., 2008, “Stress Analysis of an Infinite Plate with a
Coated Elliptic Hole under a Remote Uniform Heat Flow,” Journal of Thermal
Stresses, 31, pp. 599613.
[A113] Lin, T. H., Yang, H., Chao, C. K. and Hung, S. Y., 2009, “New High FillFactor
Triangular Microlens Array Fabrication Method Using UV Proximity Priting”
Microsystem Technolies, 15, pp. 12551261.
[A114] Hsu, W. H., Chao, C. K., Hsu, H. C., Lin, J., and Hsu, C. C., 2009, “Parametric
Study on the Interface Pull Out Strength of the Vertebral Body Replacement
Spacer Using FEMbased Taguchi Methods”, Medical Engineering & Physics,
31, pp. 287294.
[A115] Tsai, W. C., Lin, S. C., Hsiao, C. C., Lu, T. W., Chao, C. K., and Liu, H. C.,
2009, “Biomechanical Analysis of Distal radial Fractures Using Intramedullary
Kirschner Wires”, Medical Engineering & Physics, 31, pp. 182187.
[A116] Chao, C. K., and Chen, F. M., 2009, “Heterogeneous Problems in Plane
Thermoelasticity” Journal of Thermal Stresses, 32, pp. 623655.
[A117] Chao, C. K., Chern, M. J., and Lin, T. H., 2009, “Damage Evaluation of
Cladding Integrity for Spent Fuel of Interim Storage” Journal of Procedia
Engineering, 1, pp. 68.
[A118] Chao, C. K., Lu, L. M., Chen, C. K., and Chen, F. M., 2009, “Analytical
Solution for a Reinforcement Layer in a Coated elliptic Hole Under a Remote
Uniform Load,” International Journal of Solids and Structures, 46. pp.
29592965.
[A119] Hsiao, C. C., Hu, Y. C., Chang, R. C., and Chao, C. K., 2009, “Residual
Stresses and Mechanical Properties of a ZnO Pyroelectric Sensor”,
International Journal of Theoretical and Applied Fracture Mechanics , 52, pp.
16.
[A120] Chuang, W. C., Lee, A. C., Chao, C. K., and Ho, C. T., 2009, “Fabrication of
Optical Filters Based on Polymer Asymmetric Bragg Couplers,” Optics
Express, 17, pp. 1800318013.
[A121] Chao, C. K., Chen, C. K., and Chen, F. M., 2009, “Analytical Exact Solutions
of Heat Conduction Problems for a ThreePhase Elliptical Composite”
Computational Modeling of Engineering and Science, 47, pp. 283298.
[A122] Hsu, C. C., Lin J., Amaritsakul, Y., Antonius, T., and Chao, C. K., 2009, “Finite
Element Analysis for the Treatment of Proximal Femoral Fracture”, Computers,
Materials and Continua, 11, pp. 113.
[A123] Lin, T. H., Yang, H., and Chao, C. K., 2010, “New Fabrication Method of
MicroPyramidal Vertical Probe Array for Probe Cards", Microsystem
Technologies (in press).
[A124] Chao, C. K., Hu, J. Y., Hung, S. Y., and Yang, H., 2010, “Theoretical
Prediction of Fiber Coupling for Ellipsoidal Microlens", Journal of Mechanics,
26, pp. 2936.
[A125] Shih, K. S., Lin, S. C., Chao, C. K., Lee, W. S., Lu, T. W., and Hou, S. M.,
2010, “Biomechanical Influence of Pin Placement and Elbow Angle on Hinge
Alignment of Hinged ElbowFixtor Construct”, Journal of Biomechanics (in
press).
[A126] Hsu, W. H., Hsu, C. C., Chao, C. K., Tsai, Y. H., and Hsu, H. C., 2010,
“Analysis of Compressive Strength and Subsidence of the Vertebral Body
Cage with Taguchi methods”, Journal of the Chinese Institute of Engineers (in
press).
[A127] Chao, C. K., 2010, “Thermal Stresses in a Viselastic TriMaterial”, Acta
Mechanica (accepted).
[A128] Chao, C. K., Yang, K. C., Chen, J. Q., and Tseng, C. C., 2010, “Effect of
Hydride Embrittlement on Creep Life of Spent Fuel Cladding,” Journal of
Chinese Institute of Engineers (accepted)
[A129] Fan, C. C., Hsu, C. C., Chao, C. K., Lin, S. C., and Chao, K. H., 2010,
“Biomechanical Comparisons of Different Posterior Instrumentation
Constructs after TwoLevel ALIF: a Finite Element Study”, Medical
Engineering & Physics, 32, pp. 203211.
[A130] Porter, G. A., Chao, C. K., Chang, R. C., and Li, Y. C., “Effects of Different
Interlayers on IndiumTin Oxide Thin Films Sputtered on Flexible PET
Substrates,” Journal of Chinese Institute of Engineers (accepted)
[A131] Chao, C. K., Wikarta, A., and Korsunsky, A. M., “Antiplane Problem of
Interaction between a Crack and a Reinforced Elliptic Hole Embedded in an
Infinite Matrix”, International Journal of Theoretical and Applied Fracture
Mechanics (accepted).
[A132] Chao, C. K., Chen, C. K., and Chen, F. M., 2010, “Interfacial Stresses Induced
by a Point Heat Source in an Isotropic Plate with a Reinforced Elliptical Hole”
Computational Modeling of Engineering and Science (submitted).
[A133] Chao, C. K., Chen, C. K., and Chen, F. M., Korsunsky, A. M., “Green’s
Function for a Coated Elliptic Hole Problem in Plane Elasticity,” International
Journal of Theoretical and Applied Multiscale Mechanics (accepted).
[A134] Fan, C. Y. Chao, C. K., Chao, K. H. and Hsu, C. C., 2010, “The Optimum
Cage Position and Orientation on the ALIF with Facet Screw Fixation: a Finite
Element Analysis and the Taguchi Method", Journal of Mechanics (accepted).
[A135] Chao, C. K., Lin, J., Putrai, S. T., and Hsu, C. C., 2010, “A NeuroGenetic
Approach to a Multiobjective Design Optimization of Spinal Pedicle Screws",
Journal of Biomechanical EngineeringTransactions of the ASME (submitted).
[A136] Chao, C. K., Lin, J., and Hsu, C. C., 2010, “Comparisons of Multiple Linear
Regression Analyses and Artificial Neural Networks in Developing the
Objective Functions of the Orthopaedic Screws", Medical Engineering &
Physics (submitted).
[A137] Hsu, C. C., Chao, C. K., Lin, F. H., and Lin, J., 2010, “Notch Sensitivity of
Titanium Causing Contradictory Effects on Locked Nails and Screws” Medical
Engineering & Physics (accepted).
Conference Papers
[B1] Chao, C .K. Stability of Cracks Interacting with Fibers. International Conference
of Advanced Composite Materials and Structures, Taipei, Taiwan, Republic of
China, July, (1986).
[B2] Chao, C. K. and Yu, C. H. Failure Analysis of Pressure Vessel by Strain Energy
Density Theory. Proceedings of the 6th National Conference of the CSME, Tainan,
Taiwan, Republic of China, November, (1989).
[B3] Chao, C. K. and Chang, R. C. Failure Analysis of a Thermoelastic Cracked Plate
by Formulating the Hilbert Problem. Proceedings of the 7th National Conference
of the CSME, Sinchu, Taiwan, Republic of China, November, (1990).
[B4] Chao, C. K. and Chang, R. C. Central Crack in Anisotropic Elastic Solid.
Proceedings of the 8th National Conference of the CSME, Taipei, Taiwan,
Republic of China, November, (1991).
[B5] Chao, C. K. and Wang, J. L. Failure Prediction of a Plate Weakened by an Elliptic
Hole under Thermal or Mechanical Load. Proceedings of the 15th National
Conference on Theoretical and Applied Mechanics, Tainan, Taiwan, Republic of
China, December, (1991).
[B6] Chao, C. K. and Chang, R. C. Failure Analysis of an Anisotropic, Finite Cracked
Plate under mechanical or Thermal Load. Proceedings of the 2th ROC
Symposium on Fracture Science, Taipei, Taiwan, Republic of China, March,
(1992).
[B7] Chao, C. K. and Chang, R. C. Thermoelastic Problems of Interfacial Crack
Between Dissimilar Anisotropic Materials. International Conference on Advanced
Composites, Wollongong, Australia, February, 1519, (1993).
[B8] Chao, C. K. and Shen, M. H. Thermoelastic Problem of Curvilinear Cracks in
Bonded Dissimilar Materials. Proceedings of the 17th National Conference on
Theoretical and Applied Mechanics, Taipei, Taiwan, Republic of China,
December, (1993).
[B9] Shen, M. H. and Chao, C. K. Exact Solutions for the Elastic and Thermoelastic
Fields with a Rigid CircularArc Inclusion. Proceedings of the 10th National
Conference of the CSME, Sinchu, Taiwan, Republic of China, November, (1993).
[B10] Chao, C. K. and Shen, M. H. Thermoelastic Contact between a Flat Punch and
Anisotropic HalfSpace. Proceedings of the 18th National Conference on
Theoretical and Applied Mechanics, Sinchu, Taiwan, Republic of China,
December, (1994).
[B11] Chao, C. K. and Shen, M. H. Thermoelastic Problem of Bonded Dissimilar
Materials with a Rigid CircularArc Inclusion. Fourth Pan American Congress
of Applied Mechanics, Universidad del Salvador, Buenos Aires, Argentina,
January 36, (1995).
[B12] Tseng, C. C. and Chao, C. K. Fuel Rod Load Follow Analysis. Proceedings of
The Sixth NFDINER Seminar on Fuel Technology, Taoyuan, Taiwan ,
Republic of China, May, (1995).
[B13] Chao, C. K. Damage Assessment of Projectile/Target under Nominal Ordance
Impact. ASME/JSME Pressure Vessels and Piping Conference, Hilton Hawaiian
Village, Honolulu, Hawaii, U.S.A, July 2327, (1995).
[B14] Chao, C. K. and Wang, J. W. Investigations on the Heat Flux Intensity Factor for
Two Concentric CircularArc Cracks Subjected to a Point Heat Source. The
Eighth AsiaPacific Conference on Nondestructive Testing, Taipei, Taiwan,
R.O.C., December 1114, (1995).
[B15] Chao, C. K. and Lee, J. Y. Thermoelastic Interaction between a Crack and a
Circular Inclusion. Proceedings of the 12th National Conference of the CSME,
ChiaYi, Taiwan, Republic of China, November, (1995).
[B16] Chao, C. K. and Kao, B. A Thin Cracked Layer Bonded to an Elastic HalfSpace
Under an Antiplane Concentrated Load. Proceedings of the 13th National
Conference of the CSME, Taipei, Taiwan, Republic of China, November,
(1996).
[B17] Chao, C. K. Analysis of Crack Problems in Dissimilar Media Under a Point Heat
Source. Proceedings of the 19th International Congress of Theoretical and
Applied Mechanics, Kyoto, Japan, August 2531, (1996).
[B18] Chao, C. K. Coating Cracks in Materials Under an Antiplane Concentrated Load.
Proceedings of the 9th International Conference on Fracture, Sydney, Australia,
April 15, (1997).
[B19] Chao, C. K. Damage Assessment of TwoLayer Targets under Nominal Ordnance
Impact. Proceedings of the First International Conference on Damage and
Failure of Interface, Vienna, Austria, September 2224, (1997).
[B20] Chao, C. K. On Multiple Circular Piezoelectric Inclusions Embedded in an
Intelligent Material. Proceedings of the Third International Conference on
Fracture and Strength of Solids, Hong Kong, December 810, (1997).
[B21] Chao, C. K. Solutions for Heterogeneous Problems in Plane Elastostatics.
Proceedings of the First AsianAustralasian Conference on Composite Materials,
Osaka, Japan, October 79, (1998).
[B22] Chao, C. K. Thermoelastic Punch Problems for an Isotropic HalfPlane. Sixth
Pan American Congress of Applied Mechanics, Rio de Janeiro Osaka, Brazil,
January 48, (1999).
[B23] Chao, C. K. Interaction between a Hole and an Elastic Circular Inclusion under a
Remote Uniform Heat Flow. 12th International Conference on Composite
Materials, Paris, France, July 59, (1999).
[B24] Chao, C. K. Hole Problems in Anisotropic HalfSpace. International Workshop
on Fracture Mechanics and Advanced Engineering Materials, The University of
Sydney, Australia, December 810, (1999).
[B25] Chao, C. K. Stress Analysis of Hole or Crack problems in an Anisotropic
HalfSpace. 27th Annual Review of Progress in Quantitative Nondestructive
Evaluation, Iowa State University, Ames, IA, U. S. A., July 1621, (2000).
[B26] Wang, C. H. and Chao, C. K. On Approximate Solutions for Nearly Circular
Inclusion Problems Under Remote Uniform Heat Flow. The Fourth Pacific
International Conference on Aerospace Science and Technology, Kaohsiung,
Taiwan (2001).
[B27] Wang, C. H. and Chao, C. K. On Approximate Solutions for Nearly Circular
Holes in an Infinite Anisotropic Thermoelastic Solid. International Conference
on Complexity and Frontiers in Strength and Fracture, Tohoku University,
Sendai, Japan, (2001).
[B28] Hsu, C. C., Lin, J., Wang, J. L., Chao, C. K., and Hou, S. M. Stress Analysis of
Distal Locking Screws in Locked nailing of femoral Fractures. The 43th Annual
Meeting, Association of Orthopaedic Surgery of ROC, Taipei, Taiwan, Republic
of China, October, (2001).
[B29] Hsu, C. C., Lin, J., Wang, J. L., Chao, C. K., and Hou, S. M. Mechanical testing
and finite element stress analysis of tibial locking screws. The 43th Annual
Meeting, Association of Orthopaedic Surgery of ROC, Taipei, Taiwan, Republic
of China, October, (2001).
[B30] Hsiao, C. C., Chao, C. K. and Chen, P. Q. FEM Model on Bone Screw Designs
for Holding Power. Proceedings of the 13th National Conference of the CSME,
Taipei, Taiwan, Republic of China, November, (2001).
[B31] Chao, C. K., Hsu, C. C., and Lin, J. Finite Element Analysis and Biomechanical
Testing for Interlocking Nailing of Femoral Fracture. Proceedings of the 13th
National Conference of the CSME, Taipei, Taiwan, Republic of China,
November, (2001).
[B32] Chao, C. K., Chang, C. C., and Chen, P. Q. Biomechanical Testing of Pedicle
Screws for Holding Power. Proceedings of the 13th National Conference of the
CSME, Taipei, Taiwan, Republic of China, November, (2001).
[B33] Chao, C. K. On the Elastic Field for Multiple Circular Inclusions in AntiPlane
and Plane Elastostatics. Proceedings of the first TaiwanJapan Workshop on
mechanical and aerospace Engineering, Tainan, Taiwan, Republic of China,
December, (2001).
[B34] Hsu, C. C., Wang, J. L., Lin, J., and Chao, C. K. Bending Strength of Tibial
Locking Screws: Mechanical Testing and Finite Element Analysis. The 4th
Symposium of Orthopedic Trauma and Osteomyelitis, Keelung, Taiwan,
Republic of China, April 27, (2002).
[B35] Chao, C. K. Indentation Problems of TwoDimensional Anisotropic
Thermoelasticity with Perturbrd Boundaries. ASME Pressure Vessels and Piping
Conference, Vancouver, British Columbia, Canada, August 48, (2002).
[B36] Chao, C. K. On Approximate Solutions for Inclusion Problems in Plane
Thermoelasticity. The 6th FarEast Conference on NonDestructive Testing,
Tokyo, Japan, Oct. 2124, (2002).
[B37] Hsu, W. H, Chen, P. Q., and Chao, C. K., Finite Element Analysis for
Interlocking Nailing of Femoral Fracture. Proceedings of the 26th National
Conference on Theoretical and Applied Mechanics, Huwei, Taiwan, Republic of
China, December 2021, (2002).
[B38] Hsu, C. C., Lin, J., and Chao, C. K. Parametric Analysis of Bending Strength of
Tibial Locking Screws by Finite Element Method and Taguchi Method.
Proceedings of the 26th National Conference on Theoretical and Mechanics,
Huwei, Taiwan, Republic of China, December 2021, (2002).
[B39] Chao, C. K., and Chen, F. M. Contact Stresses in an Infinite Plate Containing an
Elastic Circular Inclusion under Thermal Loads. The 5th Euromech Solid
mechanics Conference, Thessaloniki, Greece, August 1722, (2003).
[B40] Lin, J., Hsu, C. C., Wang, J. L., Chao, C. K., and Hou, S. M. Bending Strength
of Tibial Locking Screws: Mechanical Test, Finite Element Model and Robust
Design Analysis. The 45th Annual Meeting, Association of Orthopaedic Surgery
of ROC, Taipei, Taiwan, Republic of China, October, (2003).
[B41] Hou, S. M., Hsu, C. C., Wang, J. L., Chao, C. K., and Lin, J. Mechanical Tests
and Finite Element Models for Bone Holding Power of Tibial Locking Screws.
The 45th Annual Meeting, Association of Orthopaedic Surgery of ROC, Taipei,
Taiwan, Republic of China, October, (2003).
[B42] Tsai, Y. T., Hsu, C. C., Wang, J. L., Chao, C. K., and Lin, J. Mechanical Tests
and Finite Element Models for Bending Stiffness of Bone Plate. The 63th
Annual Congress of Surgery, Taiwan Surgical Association, Taipei, Taiwan,
Republic of China, March, (2004).
[B43] Yang, H., Chao, C. K., Lin, T. H., and Lin, C. P. Fabrication of graduation
microlens array with increasing sag heights using UV proximity printing
method. Proc. DTIP of MEMS & MOEMS, Montreux, Switzerland, May 1214,
(2004).
[B44] Chao, C. K., and Hsiao, C. C., Stress Analysis of an Elastic Cracked layer
Bonded to a Viscoelastic Substrate. ASME Pressure Vessels and Piping
Conference, San Diego, California, U. S. A., July 2529, (2004).
[B45] Fan, C. Y., Chao, C. K., Chen, P. Q., and Lin, S. J. Parametric Study of the
Effect of Interbody Cages on Lumbar Mechanism. The 6th Annual Symposium
of Taiwanese Society of Biomechanics, Taipei, Taiwan, Republic of China,
November 27, (2004).
[B46] Hsu, W. H., and Chao, C. K., Influences of Muscular Contractions on the Stress
Analysis of the Distal Screws and the NailHoles for Tibial Nailing. The 6th
Annual Symposium of Taiwanese Society of Biomechanics, Taipei, Taiwan,
Republic of China, November 27, (2004).
[B47] Chao, C. K., and Chen, F. M., Thermal Stresses in an Isotropic Trimaterial
Induced by a Point Heat Source. Proceedings of the Seven International
Conference on Fracture and Strength of Solids, Bali, Indonesia, April 46,
(2005).
[B48] Chao, C. K., and Chen, F. M., Green’s Functions for a Point Heat Source in
Circularly Cylindrical Layered Media. 6th International Congress on Thermal
Stresses, Vienna, Austria, May 2629, (2005).
[B49] Hsu, C. C., Lin, J., Su, F. C., Chao, C. K., Wang, J. L., and Hou, S. M.
Increasing Bending Strength and Bone Holding Power of Spinal Pedicle Screws
by Conical Screw Design: Biomechanical tests and finite element analyses. The
47th Annual Meeting, Association of Orthopaedic Surgery of ROC, Taipei,
Taiwan, Republic of China, October, (2005).
[B50] Hou, S. M., Hsu, C. C., Chou, C. C., Chao, C. K., Wang, J. L., and Lin, J. Finite
Element Analysis for the Treatment of Proximal Femoral Fracture. The 47th
Annual Meeting, Association of Orthopaedic Surgery of ROC, Taipei, Taiwan,
Republic of China, October, (2005).
[B51] Hsu, C. C., Chao, C. K., Wang, J. L., Hou, S. M., and Lin, J. Multi objective
Design Optimization of Tibial Locking Screws Using Genetic Algorithm:
Evaluation of Mechanical Performance. The 2nd Asian Pacific Conference on
Biomechanics, Taipei, Taiwan, Republic of China, November 2325, (2005).
[B52] Lin, T. H., Yang, H., and Chao, C. K. PDMS Microlens Array Mold
Fabrication in Photoresist using UV Proximity Printing Method. The 22nd
National Conference on Mechanical Engineering, The Chinese Society of
Mechanical Engineers, JungLi, Taiwan, Republic of China, November 2526,
(2005).
[B53] Hsu, C. C., Chao, C. K., Wang, J. L., and Lin, J. Increase of Pullout Strength of
Spinal Pedicle Screws with Conical Core: Biomechanical Tests and Finite
Element Analyses. The 29th Conference on Theoretical and Mechanics,
Hsinchu, Taiwan, Republic of China, December 1617, (2005).
[B54] Chao, C. K. Green’s Functions for a Point Force in a ThreePhase Composite
Cylinder. ASME Pressure Vessels and Piping Conference, Vancouver, British
Columbia, Canada, July 2327, (2006).
[B55] Chao, C. K. and Chen, F. M. Thermal Stresses in Multilayered Media with
Straight or Circular Boundaries. 19th Australasian Conference on the Mechanics
of Structures and Materials, Christchurch, New Zealand, November
29December 1, (2006).
[B56] Sih, K. S., Lin, S. C., Chao, C. K. and Hou, S. M., Kinematic Study of the
Innovative Dynamic Wrist Fixator with Arthrodiatasis. The 48th Annual
Meeting, Association of Orthopaedic Surgery of ROC, Taipei, Taiwan, Republic
of China, October, (2006). [First prize award]
[B57] Porter, G. A., Chuang, C. T., Chao, C. K. and Chang, R. C. Thermal Stresses in
a Viscoelastic Trimaterial With a Combination of a Point Heat Source and a
Point Heat Sink. 7th International Congress on Thermal Stresses, Taipei, Taiwan,
June 47, (2007).
[B58] Chuang, C. T., Chao, C. K. and Chang, R. C. Thermoviscoelastic Analysis of a
ThreePhase Composite Cylinder. 7th International Congress on Thermal
Stresses, Taipei, Taiwan, June 47, (2007).
[B59] Chao, C. K. Chen, J. Q., Yang, K. C. and Tseng, C. C. Creep Crack Growth
Evaluations of Dry Storage Spent Fuel. 7th International Congress on Thermal
Stresses, Taipei, Taiwan, June 47, (2007).
[B60] Chao, C. K. Analysis of thermal stesses in a viscoelastic trimaterial under a
point heatsource. 6th International Congress on Industrial and Applied
Mathematics, Zurich, Switzerland, July 1620, (2007).
[B61] Chao, C. K. A Creep Rupture Criterion for Spent Fuel Zircaloy Cladding in
Interim Storage. 4th JapanTaiwan Workshop on Mechanical and Aerospace
Enginering, Tokyo, Japan, October 2931, (2007).
[B62] Chao, C. K. Thermoviscoelastic Study of Singularities Interacting with
Interfaces. International Conference of Mesomechanics 2008, Cairo, Egypt, Jan.
28Feb. 1, (2008).
[B63] Chao, C. K. Study of Singularities Interacting with Interfaces for a
Thermoviscoelastic Trimaterial. Professor Liviu Librescu Memorial Sessions at
the ESM 2008 Mechanics Conference 2008, Virginia Tech, May 2930, (2008).
[B64] Chao, C. K. Thermal Stresses in a Viscoelastic Trimaterial. Asian Conference
on Mechanics at Functional Materials and Structures, Matsue, Japan, October
31 November 2, (2008). (Invited to be a Keynote Lecture)
[B65] Fan, C. Y., Chao, K. H., Chung, S. Y., and Chao, C. K. The Effect of Different
Cage Orientation on the ALIF Intial Stability – A Finite Element Analysis and
Taguchi methods. Conference for Society of Surgery of the Spine, ROC, October
31 November 2, (2008).
[B66] Chao, C. K. Lin, J., Hsu, C. C., and Amaritsakul, Y. Finite Element Analysis for
the treatment of Proximal Femur Fracture. International Conference ICCES09,
Phuket, Tailand, April 8 13 (2009) (Invited to be a Keynote Lecture).
[B67] Chao, C. K. and Chen, F. M. Hetergeneous Problems in Plane Thermoelasticity.
International Congress on Thermal Stresses, Illinois, USA, June 1 4 (2009)
(Invited to be a Keynote Lecture).
[B68] Chao, C. K. Chern, M. J., and Lin, T. H. Damage Evaluation of Cladding
Integrity for Spent Fuel in Interim Storage. Mesomechanics, University of
Oxford, UK, June 21 24 (2009) (Invited to be a Keynote Lecture). 









